First pass on new setup without a launch....need opinions

[gtfrede]

I will upload copy of the slip soon but basically mods in my sig and it was on 20 psi with wastegate ran tuner style and rod maxed out with my stock converter

2.4 60'
8.3 1/8th et
92.20 1/8th mph
12.60 1/4 et
115 1/4 mph

23/20 timing

what could I expect with a good launch?

 

[josh young]

You've got a lot of speed in the 1/8. I know 89 is 7.60's in the 1/8, I'd say a little better than that. Your 60's are killing you.

 

[we4Mateo]

My car is no record breaker si I need 95mph or more to sub 7.50 in the 1/8. With your mph, I was running high 11's with a good hook, so you should be there too. Plenty will say, "I've gone so and so" but I know my car is a pig with a bad driver, so anyone can do it.

 

[gtfrede]

Im thinking with around 25 pounds 1.6-7 60 should be right at your times we4mateo....need to get more boost out of her and Im thinking a very small bump of nitrous will take care of my 60's....hopefully

I was basically wondering if the mph seemed like it was there....

Im too used to my talon cause that 2600 lb little fucker has good mph

 

[V6POWER]

I have about the same combo, except for intercooler. See sig. for et/mph.

 

[gtfrede]

V6 power how many pounds of boost for that pass?

 

[Phoneguy]

Thats not a bad run for 20 psi. Your 60' needs a lot of improvement. Turn it up...LOL

Bryan

 

[gtfrede]

Oh yeah definitely the 60 foot was basically a no boost roll out like I was leaving a stop sign...

 

[Street Lethal]

Im thinking a very small bump of nitrous will take care of my 60's....hopefully

You need a converter, not nitrous. Your MPH is already there for a low to mid eleven second pass...

 

[V6POWER]

V6 power how many pounds of boost for that pass?

26# with 20 degrees timing throughout.