Search results

Put coil-overs on my car, and will be ordering some 18's and the PTE just hangs to low. Looking for a RJC or Cottons front mount to trade for. Can kick in a little $ if necessary. Up-pipe is drilled for dual nozzle alky. Not looking for PTE, ESP, or other types of front mounts just the two...

Just looking for any tips or tricks for intalling new roof rail seals. Also where to get the push pins, and foam for the top of the metal peice that bolts to the body (part number?). I have new GM seals, and 3M super weatherstrip adhesive. Missing anything else? It just came back from...

What do you use for behind the B pillar pieces? Its some sort of padded adhesive, possibly the same stuff on top of the rail molding piece. I have all new GM seals so I want to do it right, whats the best way to install door/roof/trunk seals? Do I need any other adhesive or sealants...

Looking for GM roof rail seal for a hard top. Let me know if you have any :)

Just curious if any one has pics of cars with either size? I would really like the bigger wheel, but it only narrows down DR choices and I'm sure it doesnt help traction. I just feel like 17's were the hot ticket 5 years ago, but not sure about hooking on the 18's. Really looking at a black...

It's been a while since I've made it out, but it was worth the wait. Was looking for the elusive 11 sec time slip and ended up going 11.42 @ almost 118! Was pretty stoked with that since I know she's got more in her (only 20psi). Here is a break down of the slip: 60'-1.694 330-4.691...

In need of the following let me know if you have any (only looking for new pieces) Bumper Fillers (F & R) Dew Sweeps Misc gaskets (door locks, and handles,mirror, etc...) Weather Stripping/seals (GM only) Antenna Bezel Let me know what you got :D

What parts are needed when painting? I'm planning on: -GM in front ($144 from gmpartsdirect), and fiberglass rear bumper fillers ($175 from gbodyparts) -GM dew sweeps ($117 from gmpartsdirect) -not sure about side window molding (and how to remove it :confused:) Any...

OK after headgasket replacement the car has idled rough, and sometimes not at all. The IAC is really high reading in the 90-150 range, the TPS wanders around (.36, .44, .38, .42. etc) with just the key on, when I unplug the IAC this stops and it is steady at .38. I tried to get the IAC down but...

I replaced the head gasket, and now I cant get the car to idle right. Once it gets moving its fine, drives fine. It's not really throwing any codes, it threw a low MAT voltage once. I checked it and started the car again and the code was gone. It seems to missing at idle and is idleing to low...

I really need to get this car fixed, my last 6 months have seen about 0 days of this car running well. Long story short: Bad tranny, ordered a new one Had a fuel delivery problem, stranded me on the way to work. Stranded me 3 times, while eating crank sensor's (fixed a bent crank trigger...

The car runs and drives fine, but when I build boost its fine up to about 13-15psi then stumbles and coughs. I had a no start issue that turned out to be the crank sensor, so I fixed that and the problem remains. I have replaced coil pack and module, wires, plugs, and o2. Still it remains, it...

Anyone seen the new Greg Weld Wheels? I really like the looks of the dragstar, and updated prostar. I was also reading on an LS1 forum and they said that the 15 in wheels will clear LS1 brakes. Just wondering if any one has them yet and how they look. FACTS from the forum 1. Greg Weld sold...

Okay long story short, car died on me and left me stranded. It had poor fuel pressure so I replaced the filter and it ran fine for a while (3-4 min) then died again. I pulled the tank and drained the gas, cleaned the pump sock, and replaced all the rubber lines by the tank. Same thing ran good...

Just wondering how often you've been stranded by your Buick, because mine has to be somewhere between 15-20. This morning adds another, I just hate how it will seem to be running fine and then go crazy out of the blue. :mad:

I just wanted to let everyone know about the awesome customer service I have recieved from Steve. Everytime I need some help or have a question he is right there ready and willing to help. Recently I sent him my control box to repair, and he sent me a brand new one free of charge. This is an...

I just talked to my tranny guy and he told me that he cant figure out what is wrong with my tranny:confused: . He thinks there might be a crack in the case because he puts it together and pressure tests it and it tests fine. When he puts it in the car it "loses pressure" and has inconsistent...

I just got a call from my tranny guy and he told me that I need a new drum. He wants new, not reman'd because he says it wont last in my car. Where can I get one, do they have any heat treated? Thanks

I have been trying to chase down a problem for a couple of months now and I am about out of ideas. My car is not boosting over about 10lbs, but as soon as I go WOT it pegs the knock guage. I have replaced the computer, the battery, the MAF, i've redone the grounds at the back of the head, and...

Just wondering where to get an ECM. I checked with the local auto parts and Autozone has the best deal at $75, with a 1 yr wrnty. Its $150 from GM. Just wondering if anyone has another place, or has had good bad experiences with re-man'd ones.