Search results

Ok I finally got my car to shift after having it rebuilt. The idiots didn't put any check balls in the valve body.DUMBA$$ SHOP! Now the only problem I am having now is that it will not downshift into fisrt when I come to a stop. I can put in first manually. Also when I am stopped I can shift it...

Has anyone put a second spring in the govenor. I know the gn comes with one but what effect will 2 have.

OK I just had my tranny rebuilt again and it is still not shifting into 2nd until about 3900 rpm's. I adjusted the tv cable multiple times and that didn't help. Could it be in the valve body? I used Bruces shift kit. It is really Starting to piss me off. This is the 2nd rebuild in less than 1...

A friend of mine needs 2 doors for his 85 Monte Carlo SS. Are the regal doors the same or do they have a different body line. Thanks

I was wondering who has this setup on there car and how did they install them as they don't have bolt holes in the top and bottom. Thanks Tom

I have water in my oil pan. I took off the intake and can't find any blown head gaskets. According to my scanmaster i had no knock and was running slightly rich at #20 of boost w/ alcohol. I am using #1200 intake gaskets that have no valley pan attached to them. I also have allen head bolts...

Ok I had the trans rebuilt and it shifted fine for a few miles. Once the trans warmed up it shifts from 1st to 3rd. Then while driving the car home the servo comes loose and leaks fluid. NO SNAPRING! So I put in a new billet servo and new snapring in. I have 2nd gear until the trans warmsup...

I just had my transmission rebuilt and i have a question. As i take of from a stop ( normal driving ) it won't shift out of 1st. until 30-35 mph ( 3500+ rpm's ). Then when it does shift it seems to go right into 3rd gear. I have Bruces shift kit and a 2800 stall convertor. Any suggestions i can...

We installed Bruces shift kit tonight and the trans is shifting fast ( 3rd gear by 25 mph ). Also the gas pedal is very hard to push down. We guess that the trans had some kind of shift kit already Just wondering if there might be an extra sping from the original shift kit in the trans still...

I can get Factory Plastic Seat covers that the dealership removes from new cars. These are for Bucket seats that fit nicely on are cars. i was just wondering if there is any interest in people buying some for there cars cheap. Let me know what you think. I can also get the Factory plastic that...

Annual Car Show Annual Car Show The All Buick Show Saturday March 29th Scott Buick 9400 US Hwy 19 N. Pinellas Park, Fl 10:00 am. – 3:00 pm. All Year Buicks’ Welcome Sponsored by Skylark Drive Club Florida West Coast Gran Sport Club of America. For more...

Annual Car Show The All Buick Show Saturday March 29th Scott Buick 9400 US Hwy 19 N. Pinellas Park, Fl 10:00 am. – 3:00 pm. All Year Buicks’ Welcome Sponsored by Skylark Drive Club Florida West Coast Gran Sport Club of America. For more info call: Fernando Alvare’...

I started having a problem on saturday night with my taillights. When I turn on my headlamps it would blow the fuse for the taillamps. I still have turn signals and brake lights. I traced the wires for the lamps and didn't find any breaks or shorts. I replaced the light switch with and old one...

I put a new 02 sensor in last night and noticed that when I let off the gas after making a brief run the millivolts drop to 000 for about 5 sec. What is up with this? Thanks Tom

Finally got my car running good again ( THANKS JULIO ). Just have one more question. My BLM's are at 90. How do I adjust to get 128 at idle. Thanks

Ok I put in a new iac and reset it according to the gntype. org procedure. Now the car is running pig rich and stumbles when I take off from a dead stop. All of my readings on the scanmaster are fine. Any help will be appreciated. Thanks Tom

My motor is just about broken in now. I was just wondering what weight oil should be used. I live in florida so heat it a problem down here. Thanks

Ok guys, my buddy and I are trying to start the new motor. When we set the cam sensor in with the window on the drivers side , are biggest volt reading is 4.95. From what we read it should be 7.5 or so. Any suggestions on why so little volts. The car wants to start but just won't. Also the...

I found out tonight that I blew a head gasket. I didn't get it apart yet but I do have a question. There was water and coolant in the oil. What affect will this have on the motor. It didn't get driven but for a few minutes. Ant help would be appreciated.

My car is showing code 13( 02 sensor circuit oen ). Does this mean it is time to replace it. I use unleaded gas and alky. Thanks Tom