Search results

I ordered these from SC&C back when they were still available. I finally got to opening the boxes and found Currie drop-shipped 3 UCAs and 1 LCA. :( I'd really like to run these with my Currectrac UCAs. If anyone has one or a pair in like new condition, I'd be very interested.

I'm taking a lot of photos as I work on my new build. I've seen some talk on this forum about how bad the factory welds are, but I haven't really come across any pictures. So I thought I would toss some up with an easily searchable title for future reference. :) Please be advised the...

I've been hemming and hawing about what motor to use in my PT build for months. With the frame now out of the car, and likely to be ready for powder coating in the next month or so, I need to make a final decision in case I need to change motor mounts. Let me start off with my goals, and then...

Nothing terribly special here. But there wasn't a lot of info on the site, so I thought I would post a quick little how to. Special thanks to Charlie for providing the jist of it the procedure in this thread. The rest of it I gathered off other forums and YouTube. One note. I did come...

Well, after looking through electrical diagrams and Google, I'm done wasting time looking these things up. Someone please put me out of my misery and ID these so I can label the wiring harness in preparation for pulling the engine. Many thanks. :) 1. I need to know what this black wire is...

I pulled my SLIC last night and was quickly reminded that the upper PS bracket bolt goes into the water jacket. The original bolt is long since lost. Does anyone happen to know the correct length for a front mount application where the bracket is not used? I'd like to get the proper bolt back...

I have this car listed over at Corvette Forum in the C5 section. I'm posting it here more in the hopes that someone will have an interesting Buick trade as opposed to selling it outright. Although, of course, I am open to either. :) The car is located in Western Canada, and as described in...

I went looking for the gray connector behind the alternator to drain my tank and found a few Hobbs switches and some wiring that I followed back to the gas tank. I presume its to turn on the second pump in the Red's double pumper setup the car came with. I'm thinking of jumping it where it...

Somehow, the little black cover on my white Limited has gone missing. I can get a new one from a vendor I'm sure, but they are all out east. I thought I'd check and see if anyone in Canada or the northwest US might have one they're not using, so that the shipping isn't more than the part. Thanks.

I bought a blast cabinet for my shop, and was itching to try it out. So I spent last weekend blasting a spare set of T wheels I had lying around, followed by a polish of the fins and outer & inner lips using the following grits of sandpaper: 80, 180, 320, 400, 600, 1000, 1500. I jacked up...

I'm pulling all the garbage off the white Limited in preparation for putting it up for sale. Next up is the Snow Performance methanol system. Does anyone have a manual for it? I didn't see anything on their site and I want to make sure I pull everything out. TIA.

The piece on the car I bought looks like it was shot with a BB gun. :confused: It's the passenger's side I'm looking for. Thanks for any help.

I just did a search and read as much as I could about running 235/60R15 tires up front on stock rims. It sounds pretty uneventful, other than some people getting a little rubbing at full lock. But I'm curious how these tires would work with a set of new Eibach lowering springs I have lying...

I’ve had this story hanging over my head for a while. For the longest time, I just didn’t want to even think about it, and the car has sat for the past two years. Then as time went by, the importance of telling the story seemed to fade…the money’s gone and I’ve just sort of chalked it up to...

The digital dash on my white Limited is working intermittently...one of many things preventing me from registering it so I can put it up for sale. I decided to pull it to send it to John for repairs. I managed to disconnect the speedo cable, VSS, and gear indicator (column shift car) without...

I just finished setting up the blast cabinet in my shop, and was wondering what media people prefer for various jobs. Most of the stuff blasted in the cabinet will be small brackets and such from the engine compartment and undercarriage. The cabinet is 24"X36" so it'll hold a fair bit. I'm...

I'm roaming the forum gathering ideas/thoughts/info for an upcoming frame off project on my '87 GN. I really find the frame off build threads helpful (particularly the pro touring ones). The problem is, they are scattered all over the place here. Dave's (dsapper) pro touring build thread is...

I just came across this while shopping and figured it was worth a share since it's the GTA/GNX wheel. Not for the faint of wallet, but very nice wheels.

Ok first off, to be up front, I am the second owner of this car. I put one owner in the title since I bought the car from the original owner (76 at the time!) and have never registered it in Canada yet. A little history on the car... I've run the Limited Registry over the years with varying...

I've read the few threads available here about the new chassis available from Schwartz...they seem to be mostly favorable other than of course the price. I've been mulling over getting one since I first learned about them last year. I have a few things to price out up here still, but I was...