Search results

anyone run 8445 4.1 heads on a 3.8? any pros or cons? I have a set and was thinking about porting them for when I build my 3.8. Thanks

I still have the original 2004r (140,000) in the car now and now under WOT the trans will stick at about 4k rpm in first gear for about a second and then procede to go to 5k and then shift normally.. Still very drivable under normal driving. Anybody have a diagnosis for this? Already planning on...

I am purchasing a used BRF that has been converted to non lockup.. What is involved in converting back to lockup?

My 200 decided to go south and I am highly considering a turbo 350 swap... Will this just bolt in with the exception of a different crossmember?

who is the best transmission shop in the SC area? I need mine built

Can someone tell me how to wire a dw300 on stock hangar and wiring? Also have racetronix G7 wiring if I need it. Stock is on the left, dw300 on the right. If I just just switched the negative and positive what would I do with the other wires hanging out?

Just thought I would share this because I have never seen this tire on a TR before. Just put 295/65r15s (30x12.50x15) on my 87 T and somehow they fit! Car doesnt have rolled lips or a notched frame. Lots of air in the airbags and 1/4 inch spacers is all that it has. They fit but they are VERY...

I am really considering switching to e85 and right now the car has 50 lb injectors and a hotwired 255 FP. Is it possible to just get a chip burned for say 18-20 psi on this fuel system until I get the budget to upgrade to 80s and a larger fuel pump? Car has a 5831 precision and runs 7.60's in...

I just started a 4.1 build and was just wondering, did all production 4.1s come with the turbo crank?

How much boost can I safely run on the stock MAP sensor? I just installed a 5831 and plan on turning the boost up to around 25 on 110 octane at the track. Do I absolutely have to get a 3 bar?

My car is way overdue for a timing chain replacement @140k on the clock.. It's running 7.8s in the 1/8 right now, hoping to run mid-low 7s soon. What timing chain do y'all recommend?

Has anyone made one of these? If so, any noticable gains? And how does it look? I just have a cone filter on the end of a maf pipe/maf in the engine bay at the moment. Here is the link. http://www.gnttype.org/techarea/turbo/coldair.html

Just thought I would share this

I was wondering what would get me closest to lifting a tire. I have a 2800 stall, airbags, 275/60 nitto DRs, newly installed powertrax locker, front swaybar removed. Best et was an 8.14 in 1/8th with a 1.85 60ft with the open rear without the locker. Is this even remotely possible? Would...

So, one night I was with some buddies of mine and we were itching to do some racing, so through a friend of a friend we found a guy who had a toyota minivan and thought it was bad to the bone. So we put the cap on the dump pipe and went and met the guy. The guy came and took a look at my car...

So I pulled the transmission a few weeks ago and replaced the torque converter. When I was pulling it, I broke the shifter cable ( part ordered, using column to shift ) and I forgot to unhook the bracket holding the TV cable to the wall. The cable was stretched a little and will not sit flush on...

I have an 87 T with an open rear end. Right now I have Nitto DRs and air bags it hooks ok but is there anything that would help it hook a little better? My budget wont allow me to get a posi at the moment unfortunately. Any advice is appreciated!

Ok so I have a peg leg rear end with 275/60 Nitto DRs and air bags. Which air bag should have more air pressure to hook the best? Thanks!

I'm planning on going to the track tomorrow for the first time. I have a TT 5.7 street chip and im running 16 psi. I have no way to adjust the boost. I was wondering if i could throw some 110 in the tank and throw more timing in with the chip even though its burned for 93. How beneficial would...

I know that fuel pressure is supposed to go up 1 psi per lb of boost... But where is the starting point? Should it go up 1:1 from idle fuel pressure? with line on or off? Thanks for any input!