Six_Silver
New Member
- Joined
- Sep 10, 2003
I have a bs3 and have only changed the idle and WOT timing and VE tables so far over the base program that PTE supplied with the computer. Everything in the middle of the map is still how it was from PTE. Looking at my logs I think I have too much timing in my ttype at spoolup. Not sure if the fuel is where it should be either. On the brake the rpm vs timing vs boost vs a/f is below:
RPM ---- Timing ---- Boost ------- A/F ---------TPS%
2500 --- 33 --------- 1 ---------- 14.8:1 ---- 45%
2700 --- 30.5 ------- 2 ---------- 14.4:1 ----- 55%
2900 --- 27 --------- 3.5 -------- 13.8:1 ----- 65%
3100 --- 26 --------- 4.5 -------- 12.3:1 ----- 65%
3300 --- 25.5 ------- 6 ---------- 12.4:1----- 65%
3500 --- 25 ---------- 7 --------- 12.8:1----- 65%
3800 --- 26 ---------- 10 -------- 12.9:1----- 75%
4100 --- 24 ---------- 14 -------- 13.1:1----- 75%
4300 --- 23 ---------- 17 -------- 13.3:1 ----- 100%
4700 --- 22.5 -------- 20 -------- 13.1:1 ----- 100%
I also noticed that I ease into the throttle as you can see by the tps numbers above which Im sure has something to do with it. I guess I am just used to easing into it like I used to on the footbrake.
Any suggestions for target a/f and timing? I run 110 straight if it matters.
RPM ---- Timing ---- Boost ------- A/F ---------TPS%
2500 --- 33 --------- 1 ---------- 14.8:1 ---- 45%
2700 --- 30.5 ------- 2 ---------- 14.4:1 ----- 55%
2900 --- 27 --------- 3.5 -------- 13.8:1 ----- 65%
3100 --- 26 --------- 4.5 -------- 12.3:1 ----- 65%
3300 --- 25.5 ------- 6 ---------- 12.4:1----- 65%
3500 --- 25 ---------- 7 --------- 12.8:1----- 65%
3800 --- 26 ---------- 10 -------- 12.9:1----- 75%
4100 --- 24 ---------- 14 -------- 13.1:1----- 75%
4300 --- 23 ---------- 17 -------- 13.3:1 ----- 100%
4700 --- 22.5 -------- 20 -------- 13.1:1 ----- 100%
I also noticed that I ease into the throttle as you can see by the tps numbers above which Im sure has something to do with it. I guess I am just used to easing into it like I used to on the footbrake.
Any suggestions for target a/f and timing? I run 110 straight if it matters.