Search results

My ac isnt working and I checked everything else. I'm not getting any juice out of the relay. Since gnttype.org is down :( I cant get the part number. Thanks

I'm thinking of getting a 4.1 iron block built for my car, but was wondering if you need an ecm made specifically for the 4.1, or FAST system or can the stock 3.8 ecm with a chip designed for the 4.1 be used?

Today I turned on the car and waited for the fan to kick on, I got ramcharger's dual fans. It usually opens around 155 degrees but today it started at 168. So I open the hood and decied to open the radiator cap to see if the water is moving and it wasn't. The temp was up to 178. I have a new 160...

Joe I bought 6 55lbs injector's from precision a while ago. Unfortunately 3 of them have developed a bad spray pattern. I was wondering if you guy's can repair the three bad ones or would I have to buy 3 new one's?

My AC just cut off so I pull over and the fuse is blown. I took it out and put in a new fuse. Then I turned on the ac. Nothing not even a his so I look at the fuse and it melted in there, and to top it off my scanmaster is not reading the same as my speedometer. That is unless my car can...

OK What's the biggest ball bearing turbo one can run on the street with a stock bottom end 109, "before kaboom!" keeping in mind that the turbo wont be pushed harder than 18 lbs?

OK I just finish having my car towed from the ford Dealership. I went to test drive the 2003 cobra and when I got back to my car the starter had died. I rememer reading Gm-hightech with janes armstrong turbo t and that red armstrong added an lt1 starter thats 8 pounds lighter. Does anyone one...

I have a major problem. My Dell dimesion 4300 series computer has two disk drives C and E. However when I go into the C drives property it says the device is working properly but the device usage bar is blanked out and I cant click on it to disable it if I needed to. The reason I ask this is...

I got done installing the vacuum brakes and noticed that my front brake line was to low to fit in the connection is it supposed to just fit in. The back line had to be pulled to get it to aligned but it fit. I couldn't stretch the front one enough without braking. Dont know what options I have...

I'm thinking of going to a 218-218 cam in my street engine. I have the instructions but i need pictures or video to actually attempt to change the cam. So is there anyone that has pics or video of this procedure or at least know where I can get what I'm looking for?:confused:

My shifter goes from P to 1 like it was on roller skates and the tranny doesnt repond so I was told it was the shift cable. How hard is it to install it. How long would it take and what do I have to do to install it? Any Tricks? TIA

How soon before I can go to the track and use my new turbo to its full potential?

My powermaster unit is about to fail on me and was wondering about the pros and cons of switching to vacuum brakes. I got the Vacuum Brake kit from RED REGAL T it shouldn't be that hard. I have already had to replace my powermaster about 2 years ago.

Alright let me get this right in order to grease the speedo cable I have to remove the dash then while the cable is connected to the tranny. I'm pull the metal inside the speedo cable out with a set of pliers. Then grease the whole cable with lite grease and push it back in the black cable? Is...

I'm wondering if anybody has made a video on the disassembly and reassembly of the 86-87 turbo 231? I got the instructions on Gnttype.org but without the video showing step by step I wouldn't attempt it.:cool:

OK I was trying to start the car to come home from work and the car didnt want to start. Finally after like the sixth time it started but gave me a code 41 camsahft sensor malfaunction on the scanmaster. My question is do I have to replace just the sensor or both the sensor and the drive?

Just changed my gauge then had to put the original back after I fixed the vaccum line and noticed a change in Hg. Now I'm wondering how much vaccum are you guys seeing while in D and idling with a stock block?

I was wondering which turbo is more efficient at moving air under 20 lbs? Is it the TE-44 or something bigger?

Just looking for Bweavy haven't found him and I still owe him. Ed

Why are there so many people against this war? Can someone please explain that too me. I just got out of the military and I regret it now. How can people accuse The U.S of killing innocent civilians when saddam orders his people to shoot into a crowd? Sgt Edward Suarez USMC