Stripping down 10 cars

[Braciole]

87 Grand national

I need Drivers side upper door panel. (power windows and locks).
I need a driver seat skin I guess you would call it? Pass too if the price is right. :biggrin:
thanks Mike

 

[rhunt]

Car Parts

Brian:

Looking for heavy duty front and rear sway bars and the hardware to install. Been out of touch for a while. You used to be in Maryland right?

TIA

Roger

 

[kietzman]

I am looking for the driver side backseat little armrest where the rear seatbelt retracts into, as well as the entire plastic trim around that all the way to the floor. I need this in the tan interior color. If you have this, what would you like for it? Thanks.

 

[CST 03]

Brian, do you have any driver side doors that are not rusty and that don't have any body filler? If so how much?

Thanks

 

[Turbo Rocket]

Looking for a good drivers side quarter. If so how much to ship to 50131. Thanks

 

[ALKYTURBO86]

looking for a used set of hooker headers that will clear a gn1 down pipe.thanks ron..

 

[Bweavy]

looking for front serp belt set up, needing brackets, pulleys and p/s pump, have any?

Have all that. e-mail me it will be faster. If you need the bolts let me know that as well. I have plenty of good PS pumps,Alternators water pump pulleys etc..


NarcGN e-mail me & let me know the mileage. I can also steal a piece of black from the rear seat.

USMC_Turbo6,ryan77, & TwinTurboBB returned your PM's

Joe 1320 Joe no nice used ones. We built a new unit on our site. Pricey but will last for ever. E-mail me I'll see what I can do for the terminator price wise

chmirror87 we have all of that on our web site. Everything in stock except the fillers. We have a few sets every day trickling in.
GNX louvers can be found in with The GNX fender vent kit. Not plastic but Fiberglass.

Braciole I don't normally brake up new upper door panels but I did sell a passenger recently. I can sell you just a driver. as far as good used they are tough. But I do have new on my site.

Rhunt. Yes Roger it has been a while . Hope you are doing well. Shoot me an e-mail with what you want as far as front & rear.W ecarry new but I have some hollow F-body front sway bars around still.

kietzman I have the arm rests Tan or 84 Sand color gray? I should have both pretty cheap. just shoot me an e-mail.

CST 03 I have a few sets left. They haven't gotten any cheaper over the years but I still have some. Shoot me an e-mail power or manual alarm no alarm etc ..

Turbo Rocket $450 & shipping. Business to business is the cheapest. Some times it is cheaper to pick up a rust free shell depending how much rust you have.

ALKYTURBO86 Ron I have no idea if hooker headers will clear a GN-1 down pipe.

 

[ALKYTURBO86]

hooker header

do you have a set of the hooker headers?i believe they will fit .thanks..ron..

 

[87granny]

Got any left doors laying around pref. black power

 

[c n avoid87]

hood realse cable.. how much.. how do we do this?

 

[turbobooster]

bweavy im looking for a nice grey center console the main big piece that sits on the floor board for my ttype let me know if u have one and how much thanx

 

[first turbo]

rear spoiler set up all pieces?

 

[geronimo1]

I need a complete top for 86 gn. Aftermarket moonroof rusted entire top.How much shipped.

 

[Guess]

Looking for a spare tire setup - Rim, jack, lug wrench and all metal pieces to mount it all together in trunk. A little rusty is no big deal - I'm used to it. :biggrin: Zip 76266

 

[dank GN]

looking for the front window reveal molding its the metal things that cover the front windsheild and i also need the clips

 

[street6]

you got any cat hangers (the 3-bolt "c" shaped bracket) with good rubber?

 

[napachicka]

I am looking for a pair of front seat belts, locking t-top trim driver and passenger, upper passenger door panel carpet, steering column sleeve, (the one peolpe punch a hole threw to steel your GN) safety hood latch, pair of rear tail lights and bezels no crackes, not sure what I need but my driver seat bracket is bent for the bucket and kind of leans back at a crooked angle.

Thank You
Napachicka@hotmail.com

 

[samckitt]

A little late finding this, but curious if you have any fuel tanks & if so how much.
THanks,
Scot

 

[turbo96max]

driver side front bumper filler?

 

[grnadnasty84]

I need the following if you haven't crushed these cars yet:

1. belt tensioner for 86/87 with a/c
2. a/c lines for 86/87
3. 4 wheel center caps for a gn
4. front air dams for 86/87
5. dash speaker cover thing( dk the correct name)
6. trunk carpet kit if you happen to have some used ones

Thanks