There is one thing I didn't know about the car when I started doing the repair though. I'll try and take a pic to show you later. It seems that there's a vairation in the wheel wells. The 83 has a big rib running down the full legnth of it in the middle and the one I got is a later one which doesn't. It will look the same from the out side so you shouldn't notice it.
Thanks for the link on the filler Matt. I was wondering where to get some. Is it water proof?
the all metal is water proof but the metal glaze is not. the metal glaze is just to finish it off. the all metal cost more than filler but its way better . a gal of regular body filler is like $25 as a qt of all metal is $25. when you use metal glaze its like water very thin so you can only use it to finish off the repair(so you have no scratches and minor lows. here is a link to regular filler for $15. USC 21330 Feather-Rite Auto Body Filler
here is the regular filler i use. Evercoat 112 Rage Gold Premium Lighweight Filler
if you order filler get guide coat it will make your life easyer. then you will be able to see all the low spot. SEM 38203 Guide Coat Black Aerosol