Search results

GN PARTS Do you have t-top trim( the plastic on the under side of glass ).Also do you have any sheet metal (rear quarters, doors, trunk lid)? Axl2rck@aol.com Allan

Filters If I remember correctly most all the spx filtran filters are screens for the 200-4r. You can contact a local transmission part supply house to see if they have one (transtar, atc, what ever it takes, and Dacco are a few). I personally just use the screen. I've heard you can use the...

I may try to join you, but neither of my GN's are finished. I could bring the one just to show you what rust can do to one,lol. (rust the easy way to shave off .4seconds HA!):rolleyes: :p

Hey wagon, the ones on your station wagon probably won't work. I could be wrong, but the lights should be different, they look like they would work untill you take them out. I tried this with my father's 83 park avenue( which should have a similar bumper or the same if it's a buick). Like I...

clear turn lenses Don't try the part # thing . It's just like ordering aluminum drums and recieving the steel ones. The part #'s are the same whether clear or orange. Just my .02 Allan:rolleyes:

sherman wont sell you anything for a gn I treid sherman and they said we dont carry those parts. They are aftermarket air canada I believe or something similar. I bought mine for $289 a side and guess what I got them through St.Louis auto panel and they were the same supplier as shermans. My...

TTT

Thanks for the replies! I pretty much thought that was the way to do it. I kind of figured it because that is where we put the lift on most fwd unibody cars. I just wanted to do it right I don't want mess up my newer (too bad not new hehe) sheetmetal. Thanks again. Allan

Hi again. I was also wondering if anyone used fiberglass panels ie. doors, fenders, hoods etc. How are they. Anyone ever try the ground effects or bumper covers from laurenengineering.(laureneng.com)Just a question. Are they any good for street use or just racing???? Thanks again Allan

I have a question. Where to place the lift to remove the body from the frame? I am planning on changing frames and I just wanted to know the PROPER place so I don't ruin anything. Any help would be appreciated. Thanks. Allan

FIXED <WELL NOT QUITE > FOUND PROBLEM THOUGH Well after much frustration and searching wires, it seems that the previous owner had him some problems and just tied them up and left them for me. I found the problem in the wiring harness under the master cylinder(vacuum brake conversion). I...

tv cable Sounds like you may have a stretched cable. They don't always want to adjust. If the cable looks like it did not move, go ahead and grab the throttle linkage by hand and open it to full throttle. Basically till you can't move it any more. If it doesn't spring forward you may need a new...

They just flush it till it's clean and red again. It's supposed to take @32-36 qts, but usually it's less.

I am not quite sure on the 4t40/45e but I believe they run the ec3 converter apply strategy. It applies in stages and is real soft they seem to be making them all that way. They have had many problems with the pwm but most don't experience it till high mileage. If it bothers you that bad take it...

Flushing machines My 2cents (when it may not be needed). I personally do not care for the cooler feed line flush units, while they do work they are better off for the quick lube industry besides (any one that has one try to flush dodges and new gm quick disconnects)better sell them fittings...

This is just my 2cents. usually when warm is when valves like to stick. Harsh shifts are usually the t.v. valve hanging. If it works fine cold I would suspect the tv. Always factory adjust tv cables. if the 1-2 shift is not right, the rest won't be right. To factory adjust push in the button and...

:eek: Well here goes another chapter in the unsolved mysteries section of Turbo buick lore. :mad: I don't know what I did but I am guessing my no start problem was all a ground problem. It starts now after some figuring, some cussing, some swapping parts, you all know that story. :(...

TTT

won't run either Hi all I figured that I would just attach here cause I have a similar problem.( I hope I'm not being rude.) My car was running great at idle put it in gear dead. I did like everyone else and threw parts at it. problem now is no start period. This sh*t went from uh oh to oh no...

gas door I can tell you of my no brainer experience. I have owned 3, 3rd gen camaros. I bought the gn as something different to drive. yee ha buddy what a ride. Only I hated everytime I had to fill it up. Being a certified idiot I did not know about the gas cap in the flange or whatever. Any...