Tranny Cooler Fitment Question.

[HighMileage]

Does anyone here have an aftermarket cooler that fits against/attaches to the AC condenser,but fits behind the cross-bars that are in the rad support?

I know Imperial makes coolers,as well as Hayden. (?)

I want to install a large one between the condenser and those X/cross-bars.

Thanks.

 

[SSedan64]

I saw one a little while back custom made for GN-T-type with bracket etc..
I can't remember if it was on here in Parts for Sale section or Ebay. It wasn't cheap but, looked very nice.

This is it>> http://www.turbobuick.com/forums/parts-sale/339444-brh-trans-cooler-kit-best-available.html

 

[David Husek]

Give me a call

 

[titan1]

I put my B&M cooler right where you want to put yours. I just fabbed up a new radiator support out of some 5/16" rod. Figure out your offset, heat it up, bend it, flattened the ends, drill some holes, paint it black and your all set. I flattened the middle where the 2 rods cross also. Put in any size cooler you want...

 

[pacecarta]

this is how i mounted my Gm cooler , similar to the way they did the gnx

 

[aminga]

I just took the support rods off and put them in a box

 

[BIGPSI]

I just took the support rods off and put them in a box

left mine off, had no room with the cooler and ESP front mount

 

[GNONYX]

Tranny Cooler Fitment Question

I did checked out the one on EBay, and yes very nice set up, but also expensive for something that is very simple to install. I fabricated my own version of bracket by using "U" shape pipe clamp and 1/4" nylon washers between the tranny cooler and the "U" shape clamp. Although the tranny cooler I have gave me just enough hose to routed in two direction. Overall, this tranny cooler installation work out great.