Hello,
I just received my t-link please review data to let me know if you guys see anything out of the norm
Thanks
I am running an adj. reg. set to 45# vaccum line off, thrasher chip.
The instructions on how to set IAC says car should be in closed loop but at idle my car run in open loop(is this normal and if it is not how do I set IAC in open loop?
IAC: 107 42%
LV8: 221#
TPS: 4.86
INTEGRATOR: 128
O2 VOLTS: 856MV
O2Xcnt: 2#
MASS AIR FLOW: 201 GPS
MAP/BOOST: 11.1
ENGINE SPEED: 4750
ESC Counts: 99
RETARD: 6.4
BATT: NORM
BATT. VOLTS: 12.3
MIXTURE: RICH
LOOP STATUS: OPEN
COOLANT: 189
RD. SPEED: 32 MPH (SLOWING DOWN)
I just received my t-link please review data to let me know if you guys see anything out of the norm
Thanks
I am running an adj. reg. set to 45# vaccum line off, thrasher chip.
The instructions on how to set IAC says car should be in closed loop but at idle my car run in open loop(is this normal and if it is not how do I set IAC in open loop?
IAC: 107 42%
LV8: 221#
TPS: 4.86
INTEGRATOR: 128
O2 VOLTS: 856MV
O2Xcnt: 2#
MASS AIR FLOW: 201 GPS
MAP/BOOST: 11.1
ENGINE SPEED: 4750
ESC Counts: 99
RETARD: 6.4
BATT: NORM
BATT. VOLTS: 12.3
MIXTURE: RICH
LOOP STATUS: OPEN
COOLANT: 189
RD. SPEED: 32 MPH (SLOWING DOWN)