turbo john FL
ITS ONLY A SIX SHOOTER
- Joined
- Dec 30, 2002
thanks in advance for any input and suggestions . eveyone on here has always been great !
ok just finishing up install on a new stroker motor , went full roller all 4 billiet caps and rjc s girdle
figured more safe then sorry , anyway , have everything hooked up i am running a maf gen 2 , 80lbers, racetronix duals in tank , injectors are new and installed new chip for the 80s when trying to start i have spark and have fuel on the rail ( via fuel pressure gauge ) now cant tell if injectors are opening ?? but i have rechecked my cam sensor 3 times and set it uo with a new caspers cam sensor tool , i have power and reading on my scanmaster but im not even getting a stumble nor an attempt of it firing off at all so not sure for some reason injectors are not firing any ideas what to look at or check thanks !!!
ok just finishing up install on a new stroker motor , went full roller all 4 billiet caps and rjc s girdle
figured more safe then sorry , anyway , have everything hooked up i am running a maf gen 2 , 80lbers, racetronix duals in tank , injectors are new and installed new chip for the 80s when trying to start i have spark and have fuel on the rail ( via fuel pressure gauge ) now cant tell if injectors are opening ?? but i have rechecked my cam sensor 3 times and set it uo with a new caspers cam sensor tool , i have power and reading on my scanmaster but im not even getting a stumble nor an attempt of it firing off at all so not sure for some reason injectors are not firing any ideas what to look at or check thanks !!!