deathraider6996
Member
- Joined
- Jan 24, 2014
Well first time poster long time reader. I own a 87T T-Tops current mods are as listed.
Walbro 340
Fuel pressure regulator
Hotwire kit
Generic 3 inch downpipe
Rjc boost controller
Rjc powerplate
Hooker dual 2.5 exhaust
Tt chip
Scanmaster
36 lb injectors
Timing chain replaced
New upper and lower front control arms+ bushings+ ball joints
Fuel pressure gauge, boost, a/f ratio, oil pressure, temp, and voltmeter gauge.
Under hood bracing, rear seat bracing
Cold air intake
Maf and translator
Everything else is stock (for now)
I've been buying parts here and there and they're just piling up in Florida.
Here's the list of parts that will be installed at that time.
Pt-51
Vigilante 3200 stall
60 lb injectors
Comp 980s
Rebuilt tranny with some billet parts
Msd wires
Rear stock replacement moog springs
Rear bilstein shocks
Box the lower control arms
Replace rear control arm bushings
275/60-15 mickey Thompson et street radial
TT chip
27 tooth Speedo driven gear
Jeep steering shaft
Am I missing any supporting mods?
Thanks
Walbro 340
Fuel pressure regulator
Hotwire kit
Generic 3 inch downpipe
Rjc boost controller
Rjc powerplate
Hooker dual 2.5 exhaust
Tt chip
Scanmaster
36 lb injectors
Timing chain replaced
New upper and lower front control arms+ bushings+ ball joints
Fuel pressure gauge, boost, a/f ratio, oil pressure, temp, and voltmeter gauge.
Under hood bracing, rear seat bracing
Cold air intake
Maf and translator
Everything else is stock (for now)
I've been buying parts here and there and they're just piling up in Florida.
Here's the list of parts that will be installed at that time.
Pt-51
Vigilante 3200 stall
60 lb injectors
Comp 980s
Rebuilt tranny with some billet parts
Msd wires
Rear stock replacement moog springs
Rear bilstein shocks
Box the lower control arms
Replace rear control arm bushings
275/60-15 mickey Thompson et street radial
TT chip
27 tooth Speedo driven gear
Jeep steering shaft
Am I missing any supporting mods?
Thanks
Last edited: