Correction On The Jc Te45a

[10SECONDVSIX]

OK
This is what is on the latest on this Turbo. I decided to start a New Post since the other got carried away.

TE45A BIG Shaft
3" Inlet
2 1/2" Outlet
less than 500 miles on it. Seller is going bigger due to a bigger Motor.
.63 PTE Housing w/ stock WG Hole which is aroung .900"
"P" Trim Wheel
HD Actuator (NEW)

Don't know if this is a 63mm or a 66mm I don't have the Turbo with me right this minute.

$700 + Shipping so add about $25 USPS to CAN or US

 

[tbirdv6]

Ok-just to clarify:

63mm = TE45
66mm = TE45a

HTH
FRED

 

[1BADWE4T]

Do you have any pics? If so could you send them to:clv8s10@excite.com
Thanks.

 

[J-B Racing]

Do you have any pics? If so could you send them to:clv8s10@excite.com
Thanks.

Pics are not available it this time, as I would have to go the person who is selling the Turbo. He`s out of town.
Pics will be available this week-end..:smile:

 

[AKTURBOTA]

Are you absolutely certain it is a TE45a versus just a TE45?

Mark

 

[J-B Racing]

Are you absolutely certain it is a TE45a versus just a TE45?

Mark

Yes it was confirmed that it has the Big Shaft on it...

 

[tbirdv6]

Gentlemen,

Just because its a big shaft doesn't mean its a TE45a

My TE45 is a big shaft

 

[Cme2fly]

Gentlemen,

Just because its a big shaft doesn't mean its a TE45a

My TE45 is a big shaft

Every te-63/te-45 I have seen was a large shaft unit..Measure the wheel to see what turbo it truly is..Te-45 is a very good turbo used one for a few years..

 

[GN280CI]

the turbo is sold thank joe !

 

[10SECONDVSIX]

the turbo is sold thank joe !

Turbo is sold.............:smile:


Thanks
Mark