Hey everybody, haven't posted here in a while since I only drive this brick in the summer. Any way, today I was trying to fix a cam sensor code and have been unsuccessful. What I have done is tried adjusting the cam in one direction to the other with no success. Next I installed a new cap - did not fix anything. Lastly I traced wires for continuity between cam and coil (lt. blue wire), between coil and ecm (yellow wire - now I don't know if this is right). Anyhow, there was continuity and no shorts to ground on these two wires so I'm kinda stuck BTW, the car starts just fine and runs reasonably well I just want to get rid of these codes before I get a TT chip. Thanks for any help! -Len