Denny's is a 3½" aluminum matrix pro stock type. I have one in the Metro. I launch at 4900 RPM with 15# & a 50 shot of nitrous from a 1.76 first gear into a 3.33 rear gear (spool) into 11.5 slicks. There are quite a few fast cars running aluminum driveshafts. With that said, I do have the (2) DS loops and my shaft is significantly shorter than most.
C/F shafts are glued to the yokes you know.
And the 1350 yoke is for the front only I would imagine. The stock GN rear isn't a 1350, they'd have to use an adapter U-joint. That is one side is 1350 and the other is the same as your stock GN (small).
C/F shafts are glued to the yokes you know.
And the 1350 yoke is for the front only I would imagine. The stock GN rear isn't a 1350, they'd have to use an adapter U-joint. That is one side is 1350 and the other is the same as your stock GN (small).