Hi All, I'm shopping for a new Turbo for the TTA..I currently have a intake pipe from a GN and the fittment is crap. I'm leaning towards a turbo with a 4" intake...and need to address the intake pipe..should i use a rubber type hose aka pete tomka style or should i buy some 4" tubing and weld one up?
The turbo I'm leaning towards is a Turbonetics T series BB with a 66mm hot side wheel and a 68mm cold side wheel..I assume this is about the same as the TE45A that i had on my GN and with the BB option i should be able to get away with a 3200 stall..The turbo is 4" in and 2 1/2 out....Thoughts?
Thanks!
The turbo I'm leaning towards is a Turbonetics T series BB with a 66mm hot side wheel and a 68mm cold side wheel..I assume this is about the same as the TE45A that i had on my GN and with the BB option i should be able to get away with a 3200 stall..The turbo is 4" in and 2 1/2 out....Thoughts?
Thanks!