Search results

I moved up to 28" tires and they rub. Any suggestions on where to rent a fender roller. I'm in Tampa Bay if that helps. Thanks.

Thanks for the replies. My Oil Pressure is up too at idle. I am going to switch to a K&N for now.

I noticed that the new filter is a tad shorter than the one on my car. Also, the top of the filter with the holes is different. Is this one OK?

Wes, can I get your chip on Thursday? I can come by your office to get it.

Just put on a new bottom part to the coil pack. Still same problem. Wes, fuel pressure is fine and I have no idea about a compression check. Vacumm gauge is not bouncing so I'm pretty sure it is not a head gasket. Scan Master is not showing malfunction codes, made a Direct Scan file, nothing...

The car feels shaky when driving, when the TC locks up in 4th, it gets really bad. So I changed plugs, plug wires...same problem. I have a coil pack (the black unit that the plug wires go to) from the previous owner marked good. Put that in tonight and still have the same problem. What else...

G. Send me your address in a PM and I'll send you a DVD. I pretty sure I have all your runs. I know I have the one that counts!;)

Anyone using the new (could be old, I just found it) Translator Pro system? If so, is it worth it? It says in can control boost, remove the MAF sensor, control timing, windows compatible and can be used as a data logger. I have the MAF translator now and was just wondering what I could buy...

OK, I'm in. Looking forward to seeing everyone there. I'll stay out of the wagering for my car but would like to start the over/under on the Maxi's at 11 :eek:

Happened to me too...I had a bad chip. New chip made all the difference. You might also check for vacumm leaks. mo

Nicely Done. mo

I put on a Thunderfab intercooler and I do not have enough clearance between the intercooler and radiator for both the Black Magic Fan and the intercooler scoop. I'm hoping that a dual fan like Ramchargers is thinner. So, how thin is it? mo

Thanks for the replies and guidance. mo

Just got my Thunderfab intercooler. Taking the stock intercooler out I discovered an oil film all though the up-pipe. There is also oil in the throttle body and oil on the outside of all the hoses. There seems to be some oil residue on the entry and exit ducts on the intercooler but not as...

I have this fan on my car and it works great. I'm in Southwest Florida and driving in in the summer, the temp only goes to around 175 if I'm stuck in traffic and not moving. As soon as I get moving again, it goes back to 160 pretty quick. During the winter season, when the outside air temp is...

I'm gonna miss it too. Good luck on your trip. Mike

Thanks for the replies, I'm going down in tire pressure starting at 22#s next time I go to the track. If it improves my 2.0 60 foot time, I'll let you know. Mike

I went to the track for the first time last night:) Had a blast. Could not get my car to launch well with Nitto 275/50/15. Did not have much boost at the line and was spinning alot in first gear. I did a short burnout, samething. Did a longer burnout, samething. I was running 25# in each...

Al, a big thanks to you and Jim for getting this started. See you at the next meeting.

Oil Leak is fixed for now. Thanks for the help. I ended up needing a new O ring for the turbo saver kit, Fel-Pro #35617. Used for a Ford Truck V-6:eek: . Thanks. mo