Search results

  1. P

    TTA items

    Sold my TTA a few years ago and just cleaning out the garage. -2 Chiltons, The Service Manual, and the TTA supplement, like to sell as a set because I don't have any 3rd gen anymore. -Left side headlamp motor, new. Still in GM box, never opened. (I had a problem with my headlamps and found...
  2. P

    2004r question

    Wondering if anyone has ever used Monster Transmission. Good, bad? What I am really looking for is something like their conversion package. I am switching from a car with a th350, and want to use a 2004r. Anybody know of a better place? Thanks for the help. Ken
  3. P

    Anybody need headlamp motors?

    I've got a new left(still in the box) and a used right. Sold my TTA and don't need the motors. Anybody need them? Ken
  4. P

    T-top weatherstriping

    Probably going to replace my t-top weatherstriping, it leaks. Any suggestions before I do? Aftermarket weatherstriping or only GM? Any tech articles? Anything I should do first or look for? Thanks, Ken
  5. P

    MAF question

    Running direct scan on my TTA, and everything looks fine except the MAF readings. It goes from 17g/s to 250 to 150 to 80 to 213, (you get the picture). It flies up and down each frame. I'm using the extender chip and have SMC's etoh kit. I'm also using an LT1 3" sensor, and have swapped to...
  6. P

    a/c heater problem

    no matter what i put the setting on, the fan only runs through the defroster. heat, a/c, vent, all only blow at the windshield, not through the vent or heater(low). Any ideas what's wrong? Ken
  7. P

    2-3 **** Problem

    Have a TTA, and had tranny rebuilt less than 10 months ago. Had it rebuilt because 2-3 shift was slipping, and I was loosing reverse. I took it to a trans shop over an hour away because I know normal trans shops don't know these trannys. My current problem is the trans seems to be slipping at...
  8. P

    What could this problem be?

    My car sputters, and pops when under heavy (not WOT) acceleration. Also, just cruising on the highway it will jerk, almost like a misfire, but no backfire. It's pretty bad. Even if the cruise control is on. Here's what I've done: -ran on direct scan, and I can find nothing. The LV8 goes up...
  9. P

    Intercooler dead

    Brought my intercooler to a radiator shop today, he showed me all the leaks (at least 8 out of 10 rows were leaking), said it was not repairable. It looked like it was leaking from where the tubes connect to the tank. What intercoolers are out there for a TTA?(I only want stock location)...
  10. P

    Tranny Shop

    Anyone know of a good tranny shop in the Sarasota/Bradenton area? Gonna have to rebuild soon, I can feel it slipping at the 2-3 shift and in reverse. I heard of one in Ocala, but it's difficult enough to get the wife to ok a tranny rebuild, let alone a two hour ride/lecture about how I need to...
  11. P

    Direct Scan questions

    Hooked up directscan. Gave a "hardware not recognized" prob. Tried another laptop, and it gave data, weird data (kept changing with the engine off and key on). Someone told me that the Lpt1 port could be set up to send and not receive. 1) How do I change the Lpt1 port to receive data also...
  12. P

    ECM doesn't see 4th?

    For some unknown reason according to Turbolink the ECM never sees 4th gear. I've done a tranny service, changed the 4th gear switch, and am now lost. What can I do to fix this? Any help is appreciated. Ken
  13. P

    MAF sensor

    I have the extender + and am using the LT-1 MAF. Is anyone using the 3.5 LS6 or the 85mm MAF? Any improvements? Anyone using the Granatelli MAF? Wondering if any are an improvement over the 3" MAF. Ken
  14. P

    Wastegate bad?

    What happens when a wastegate goes bad? Does it set a code? I noticed that my wastegate rod was not perpendicular to the diaphragm, (instead of 90 degree angle it was at a 45) so I cleaned it up, and some rubber was sticking out of where the rod comes out of the diaphragm. After cleaning I...
  15. P

    No 4th gear?

    When using Turbolink it never shows me that I'm in 4th gear even when I really am. I did a tranny service, changed the 3-4 pressure switch, and still no 4th gear on t-link. What would do this, and how do I fix it? Thanks for the help. Ken
  16. P

    No 4th gear?

    Noticed when I was tuning that the ECM never sees 4th gear. I know the car goes into 4th gear, but it never shows up on Turbolink. I did a tranny service b/c someone told me the filter could be touching the 4th gear switch and grounding it out. The filter was fine, and I still don't register...
  17. P

    My car dies, what do I look for?

    My TTA dies, only on deceleration. Let off the gas, the rpms drop and then keep going to around 500, and then it either dies, or bounces back to normal rpm. -I've tried two chips, tried adjusting the IAC at least 10 times. -My IAC counts are between 13-21 at idle, hot, in park. -I thought...
  18. P

    Extender Problems

    Just put in my revised extender chip (version E), and having some trouble. At idle in park if I stab the throttle the SES light flashes. I checked and no codes are set in T-link or by checking the ECM w/a paperclip. Why does it do this, anyone know the fix? Also I have a deceleration...
  19. P

    Doghouse bolts stripped. Options?

    Passenger side rear, and driver's side front on the doghouse to intake. I noticed today when I was trying to find out the problem with my car. The stud in the rear of passenger side won't get tight (tried turning it upside down so it would go in more), and driver's side front is the same. What...
  20. P

    Can anyone help?

    When going down the street, if I let off the gas the rpms drop to 500rpm and the car sometimes dies. When it doesn't die the engine acts like it catches itself and jumps back up. But the car dies frequently. I did get a code 45 once (the o2 sensor is almost new), and the idle is rough. I...
Top