Search results

I'm look for a 3" stainless steel downpipe with an external wastegate. Must be stainless. Must be in great shape. If there is an O2 bung welded on it, that is OK. Wastegate must function properly. Let me know what you have.

Up for sale is my race built 200r4 transmission. I bought my car in 2007 and this transmission was freshly rebuilt in the car when i bought it. The trans oil has always been cooled by a BIG external B&M trans cooler mounted on the front of the car. I drove my car for a year (mostly street...

I am looking for forged h-beam rods in 5.960" that match up to a CKS-231 (cat) steel crank. I'd like to spend under $400 for a set. Thanks, Bryan

Alright, pretty much everyone i have contacted told me steel cranks for these cars are unavailable. I need a steel crank. I do NOT want a billet crank. I'm a college student and I only have about 650$ to spend on a new steel crank. If anyone can find me one or knows where to find one, i'd...

Bought a rjc headgasket kit from him. There was a small misunderstanding and Steve let me return them to him and gave me my money back. Great guy! Would do business with him again!

Hi guys. Im looking for a brand new stock stroke steel Eagle or CAT Crank. Must be internally balanced. Looking to spend less than $600. Thanks!

Hey guys. I just need help identifying a converter i have for the 200r4. Its a N/L 9" converter with anti ballooning plates. This is stamped on it : 1037R-0218X FL082 Any ideas?

I need the plastic interior trim pieces that are above the driver and passenger side windows, rear of the a-pillar trim. I need both sides in black!

Up for sale is a nice 3" Terry Houston Downpipe with an internal wastegate. There is a Wideband o2 bung welded on the pipe (i have a FAST B2B system). I will include an o2 bung plug. I will also include a heavy duty actuator for high boost... minimum 18psi and i have run up to 28psi with this...

I am looking for a used RJC girdle for the 109 block. It has to be in great condition with absolutely nothing wrong with it. Does not have to include the crank scraper, but all the better if you have that. College student, tight on money, and dont want my crank rolling down the road after...

Just went to do a drive around the block with the new turbo installed... its a ITS 70 DBB. The turbo was just rebuilt and i bought it on the boards from Ray Fletcher. So i drove out onto the main road and gave it 1/4ish throttle just enough to start making boost, and i can "hear" the bearings...

Just recently upgraded to larger injectors as these injectors are too small for my new setup. These injectors have less than 1000 miles on them. I've gone high tens with these injectors, 63mm turbo, on 93 pump gas with alky. Great injectors for a street car!! I've used them with a FAST B2B...

Just wanted to post some pictures of my home made 4" inlet cold air piping. It sure is a tight fit! :eek: Using a 9" tall by 8" diameter conical K&N filter. Do you guys think i should leave it polished or paint it black to match the rest?

Im in the market for an external wastegate downpipe and have been interested in the GN1 downpipe design. Im sure the GN1 owner surfs the boards from time to time... Is this style downpipe available in 3.5"? If i can get a price pmed to me that would be great :cool:

Shout box's are fun. Its like a live feed chat thats visible while you are surfing the boards. It would help keep things interesting around here. We have one on our NJSR forum and its great. Not difficult to impliment... It can be placed right below the 2nd advertisement space on the top of...

For sale: 55 lb/hr Siemans injectors. Used less than 1000 miles. Just recently upgraded to larger injectors as these injectors are too small for my new setup. These injectors have less than 1000 miles on them. I've gone high tens with these injectors on 93 pump gas with alky. Great...

While i was waiting for my new turbo to arrive, i naturally became really bored since i could not drive my car around. So instead of just waiting, i decided to just start taking everything off my motor, going at it with wire wheels, and cleaning everything up.... and then repainting the various...

I have recently pulled pretty much everything off my motor this past week and have been sanding down and repainting everything that i can. Before i install my new turbo, i would like to take my headers off and sand them down and clean them up, and repaint them. I have had experience with...

Just bought a new turbo and am looking for 4" inlet piping. My car has a FAST B2B system, so i do not have a mass air flow sensor. I only need the pipe that runs from the turbo to the air filter..... As long as the pipe isnt dented, i do not care about scratches as i am going to sand it down...

Just wondering if any of you have experience with Bi-tron products with our buicks. If not, what other oil additive have you been using? http://www.youtube.com/watch?v=Tf3moijxSvk