Search results

Guys, My car overheated temperature reached 227 per scanmaster. I pulled over raised hood and noticed a large coolant puddle on the back of the intake. I had the car towed home checked heater core hoses and none are cracked. Oil looks normal any ideas?:confused:

6=8 Thank you for the input I will check the items you mentioned

Guys, I have a GNX dash and the VDO speedometer fulctuates at cruising speeds. I removed the lower cable and cleaned/lubed it but it still fluctuates. The dash was purchased new from Tom at gnxdash.com but I have not been able to contact him. I know its either the lower cable or the VSS that...

Thanks for the assistance Guys thanks for the help, I will definately give caspers a call. BTW I was about to crap in my pants. I was the first car in the school line with a bunch of soccer moms in minivans behind me. :eek:

Guys, I have an 87 gn and I had the AC on while waiting to pick-up my daughter from school. All of a sudden I heard a noise come from under the hood(banging noise & it also sounded like radiator was overflowing) so I quickly turned off the AC and the car. I raised the hood and saw smoke and...

Thanks for the photo and replies Guys, Thank you all for the help, Grumpy that photo is right on time. Hopefully tommorrow I can re-install hose and bottle. BTW would anyone know what size hose I need?

Thanks for the replies, but still need assisstance Ok, now that I know where the line needs to attach, can I access the fitting with transmission in car? I have car on jack stands but I can not see fitting on transmission to attach hose. Please Advise

Does anyone know where the hose that attaches to the pts overflow bottle connects to the pts transmission? The overflow bottle was installed with transmission and is located under driver side frame rail. Hose is torn from transmission please advise on connection.

Thanks for the replys Guys, Thanks for the replys the alternator wire is plugged in and is not damaged I will have the alternator checked. Do you guys recommend keeping the voltage booster?

Guys, Volt light came on last night I checked scanmaster voltage at idle was 11.6 - 12.0. Took battery to Autozone had it charged and tested; batery tested good. Installed battery checked voltage on scanmaster 12.0-12.2, started car voltage at idle 11.6-12.0. Volt light comes on and stays...

Thanks Turbo Bob Turbo Bob, #1 10 pin plug is properly inserted, maftpro numbers still fluctuate at idle car in park but reads closer to scanmaster, notice when driving TPS numbers at idle car in drive will be lower than scanmaster. #2 Scanmaster with engine off reads ------.------- does...

Turbo bob (MAFTPRO Questions) 1) I inspected and recrimped all connections. TPS number on maftpro reads .42 scanmaster .44, I can move black wire on the 10 connector where it connects to maftpro and tps number starts fluctuating. 2)O2 reading on maftpro reads .200-.230 with engine off...

Thanks for replys Guys, Thanks for the info, I will double check all connections, MAFTPRO has been istalled now for @ 7 months. So far MAFTPRO has been great as usual there is always that steeeeep learning curve. BTW should the Maftpro TPS numbers engine off be static or dynamic?

Guys, I have a PTS Tranny with 911 convertor, there is a clanking noise when I put the car in gear and also when the car downshifts when coming to a stop. I have checked for loose bolts but have not found anything.

Guys, In process of setting tps, scanmaster reads .44 and maftpro is reading .24-.35 which one is correct? Car seems to run fine not seeing any codes just seems odd that the two tools don't read the same. Any ideas?

Guys, I am about to paint interior trim (headliner trim, A pillars, and Bpillars) any advice or thinkgs to look out for before starting? Are the Bpillars difficult to remove? Thanks

Turbo Bob, I ordered my maftpro back in October of this year, My documentation has 4.00 on top of he page and Maftpro says 4.00 when it comes on. I will wait for ver. 4.4. I installed my maftpro and extender chip last night to my daily driven GN. i set the parameters per instructions the...

Please email photos again FBSideoiler please send photos again, they should come thru this time Thanks

Please email photos wheels I am also interested in the Simmons Group purchase 17x8.5 245-45/17 4.4"BS Nitto 555 17x9.5 285-40/17 4.7"BS Nitto 555 Black Center polished lip OM series Sideolier, Please send photos of your set-up xdt@earthlink.net Thanks

CPT 61 bb turbo Turbonetics stage V turbo 4" inlet .63 exhaust housing + BB = New Tires:p