Search results

02 voltage I have drained the gas, has new gas, new oil, all vac lines look great. I ran the direct scan all values look good except o2 voltage , the value I found says it should be .45, +-.10, x 10-20, mine shows 500-600 mv with x of 2, sound like it's bad, what do you think.

Last season I replaced my cam, I never used the car since. I just got it home from storage, it idles fine but will not stay running sometimes, will not spin tires on power brake. I have direct link on , but have been away from the scene for a few years, where is the best place to look for these...

my cam is wiped out suggestions for a replacement??

which cam for me ? can i check a lifter? if i take it apart and it needs a cam please advise, has poston 107t now, but has that noise around the lifter im still thinking a lifter went bad any way to check a lifter?

more help camshaft?? Pleeze advise well i finally got a few minutes i let it run and observed, he is what i found : the noise is coming from driverside, the last rocker is not moving as much as the rest, i put a screw driver in the rockers, all the others would bounce the screw driver around...

thank you i pulled the valve covers off last nite thats all i had time for , so i have not watched it run while open yet, tell me about a leak down test, i used a borrowed mac tester, i did a visual on the springs and such, nothing looks bent/ broken, tomorrow hopeful will have time for a...

can you diagnos this thanx

help engine trouble nobody

i did a burn out in my driveway, see fast86gn on youtube, last year the car ran bad after so i parked it, if i remember right the car makes a dieseling sound when you try to get it going, knock light comes on you get the pic, been sitting for a year trying to remember, it also has a sound like...

not sure not sure just seen trans drip on floor in the area and looked under, cover hole has trans fluid dripping

? the trans is original , loc tight where?,return hole ???, sealant where?? just replaced the seal because i thought you were supposed to, replaced converter only reason i took it apart!!! seal came out hard, trans never rebuilt, i need to replace so tell me more please thanks tom

bungy bungy jumping is nothing! been there done that, had more fun from a plane, plugs looked fine, will do comp. ck, thought someone with more experience had a different idea. thanx....Tom

last year i replaced my converter and also front pump seal, 2000 miles and now it started leaking, when i replaced it i never let it hang, put the trans in and tightened the bolts right away, is there a better front pump seal available? thanx tom

My 10 year old convinced me do do a burn out so he could post on you tube,next day car seem to have a slight miss intermitently, next day it got worse, so i changed the plugs, first mile great, so pushed it very little then same thing, missing then started skipping again, so besides making a...

NO problem here I used an underdrive pulley on crank, car is street driven 98%, no over heating no charging issues air cranks fine at idle, when the alt was beefed up the i told them and they installed a different pulley on the alt, water pump is high volume from (flowkooler) ?, just what has...

wanted power window switch, dual window switch, must be 100%

got a response in mail, if i dont hear back your next...thanx.Tom

2 new never used airbag spacers $12 with shipping via parcel post paypal or what ever

got it i re adjusted the trans cable again found a happy spot , thanks

chrome bought mine on e bay, last year