Search results

After driving for a while and then coming to a stop my O2’s show 820’s. BLM’s seem normal at 130-134, TPS is set at .44 with the car off and .46 with the car running and the IAC in park is 28-30 depending on the fan. If I let the car sit and idle the O2’s slowly go lower and lower. I have...

If you ran 24 degrees of timing at 22 PSI would it make more power than say 22 degrees of timing at 24 PSI?

Can running to rich with fuel (gas or alky) cause the inability to build boost? Thanks

I have a front mount intercooler for sale. Not a name brand but the one several people are using that was purchased off eBay from ssautochrome. I have the intercooler and all the pipes to install it. The intercooler is like new and has very few (maybe 300) miles on it. The pipes are not mandrel...

My set up is a TA-49 turbo, 43.5 lb 009 injectors, stock intercooler, DIY alcohol kit, Turbo Tweak alcohol chip, adjustable regulator, hot wired Red’s XP pump with a TH down pipe…. Before I could run 25 PSI boost with minimal knock (.7-1.0) O2’s in the 780-820 range. The car ran awesome...

Everything you need except the wire and a LED. Turbo Tweak alky chip for stock turbo and 42.5 009's Carter pump NOS fan jet nozzle 4 NOS jets 0.28, 0.30, 0.32, 0.34 NOS braided line 10 PSI Hobbs switch and vacuum adapter (set from the factory at 10 PSI but adjustable) Coolant over flow...

I know that a few guys have installed them, they look like they fit really nice but what about performance gains? http://cgi.ebay.com/ebaymotors/INTERCOOLER-TURBO-FRONT-MOUNT-DODGE-CHEVY-FORD-MUSTANG_W0QQcmdZViewItemQQcategoryZ33632QQitemZ7992218175QQrdZ1

Using a needle valve as a restriction between the compressor and the waste gate? OR Using a needle valve as a bleeder between the waste gate and the compressor? Will either spike or be erratic in some way? I am not worried about spool up, only stable boost. Just trying to figure out who...

I have a pair of the new Mickey Thompson ET Street drag radials 235 / 60R 15’s that I want to sell or trade. Nice and just used for the street, I put maybe 5000 miles on them. Never did any burnouts just boosted launches. These hook awesome and would be great for the track or street. I am...

I have a pair of the new Mickey Thompson ET Street drag radials 235 / 60R 15’s that I want to sell or trade. Nice and just used for the street, I put maybe 5000 miles on them. Never did any burnouts just boosted launches. These hook awesome and would be great for the track or street. I am...

Great guy, great deal on a nice turbo and he even shipped it the next day!

I want something that will work with the stock converter and has a heavy duty actuator. Let me know if you have something nice with low mileage.

The digital dash in my car just went out today, does anyone know whether or not any of the aftermarket gauges will work with the factory wiring? I am thinking I would rather spend the $300.00 on a nice speedo, tach and gas gauge and fabricate my own cluster out of ABS plastic.

What side (when standing in front of the car) of the factory boost control solenoid vents to the atmosphere? Does it even matter? Thanks

I am trying to adjust some of the programmable features on Eric’s chip. The instructions say to select a parameter, turn key on/engine off, LV8 on my scan tool will now show which parameter I will be adjusting. I don't see a LV8 on my scan master anywhere? Any help would be appreciated!

Does anyone have a write up on how to tune using a scan master? I am trying to figure out the best way to start, using a scan master and a turbo tweak alky chip. The alcohol starts spraying at 10 PSI and I am running about 22-23 PSI of boost. Things like, what to look for in the bl mode on the...

What is the recommended fuel pressure for a Jim Testa 93 and 104 chip for 009 injectors? I have no idea, so please help! I have the 104 chip in now and with DIY alky on the scanmaster my lowest o2 shows 855 no knock, that is with 45 PSI fuel pressure at idle and 22 PSI of boost with the alky...

I am testing a new DIY kit and poured isopropyl to test with, I had planned on running denatured but the hardware store was closed. Does anyone know if it is ok to mix the two?, or will there be some sort of chemical reaction and my car blows up in a burst of white flames:) Thanks

I just wanted to say that the Thrasher chip Scott burned for me rocks! My car feels totally different, idles smoother, went from 6-9 degrees knock at 15 PSI to none and all with awesome fuel economy. I think this is the most I have ever got for my money!:cool:

If some one has one that is in good working order let me know, or if they have one and they would like to trade for an adjustable one I would be willing to trade. I would have to have the stock one first to replace the one on my car though. Thanks, Jeff jeffhinterlong@hotmail.com