Thank you. Fronts are 215s I think and rears for track are 28x10.5s on 15x8 prostars. Normally I have either matching stock T wheels/tires on rear or 275/60 MT DRs on 15x8.5 American racing vectors
Hey Bob, do you have any of the rear bumper shims that kinda look like an "E"? Just put on new bumper fillers and they are hitting the upper corners of the bumpers so I thought I could throw an extra shim in there.
Also, needing a right rear (passenger side) taillight for a chrome trim car...
My boss and his dad are needing to paint new bumper fillers for their WH1 they bought new. I pointed him to the spid on the trunk lid, but the WA.xxxx number is for the black. Nothing for the gray, and they are having a heck of a time matching the gray. Nothing they have found actually matches...
March 1996 - 2 months before I turned 16 my grandma gave me $1300 to buy a 1980 Regal from the family of an older lady that had passed away. It had 8300 original miles on it and still smelled new. One of those "only drove it to church and the grocery store" cars that everyone claims they have...
Cool! Thanks Rob. That's what I figured but I wanted to verify for certain. Luckily I impulse bought some electronic calipers awhile back and was able to do some measuring to figure out what I need. Hopefully the bolt pattern will line up because it didn't before, hence the broken studs.
So I'm basically trying to figure out exactly what I have. I bought the car with swapped wheel studs all around (7/16). Put new rotors on the front so they are correct metric threads now. I've just been dealing with the rears being mismatched until I broke 3 of them off trying to remove my welds...
I dug up the old thread where I posted a few pics. HTH
http://www.turbobuick.com/forums/threads/m-t-275-60-drag-radials-on-stock-t-wheels.319103/#post-2501061
That's what I ran on mine up until 2 days ago (about 7 years). I got a set of 8.5" wide Vectors so I mounted the DRs on them and put the stock sized street tires back on the T wheels. Aluminum drums on mine too. Seemed to fit well with no rubbing, and the tires fit the rims fine. I have posted...