Recent content by rocket468

Grumpy Let me know how that works for you :) Yea, I have had people using E85 I have never had someone use gas :(

Just have to pop the trunk everytime you need to adjust the controller.

I think somehow you miss under stood me. Us and the other 2 largest water injection compays buy our pumps directly thur shurflo with meth compatible parts already done up. It just makes since to buy direct. Have 1/2 the amount of money in pump and not have to spend man hours modding...

Hmm which guy where ya, the one with the grand national :) yea I usually race but I been so busy i have not had time to play with my toys. yea, we got quite afew things in the works. I will take some pics and put them on the net when i got things in quanity to sell. Here is a link to...

Umm, doesn't matter. It needs that amount of fluid over the course of an hour... 1 gallon of meth in a milk jug is still a 1 gallon even if its under pressure. So people need to be aware of the pressure they will have with a given pump size, nozzle size, etc. I didn't want to say use a...

Alcohol Nozzle size Calculator This should give you an idea what size nozzle you need with all the alcohol Injection kits out there. Even an DIY kit. This is still kinda a beta on the figures so if anyone could give me feed back I would greatly appreciate it. You can save the file to a txt...

My 3 cents :) Like julio I like to give our own tech support for our products. Especial the elec. items. Neither of us know all the workens of each others stuff. We do have a contact phone number on our site. Its only been there for a few weeks, so a lot of people dont' know its...

blueta You will also need to re-flash your computer to add timing over the iat, The stock timing over the iat is pointless to mess with. I have mine reflashed to add or pull up to 10deg of timing. I would just get a happy knob or an iccu if you can find one. Iccu can add or pulling timing...

How high you get is dependent on your tuning ablity. Dtech will work well with tuning. Your going to want right about 7-8gpm of actually flow so that would put you at 5gpm of nozzle. That will put you around 15% of meth to fuel which is where you want to be. I know exactly what you mean...

I have never heard of one going bad myself. We had one guy have Inteses go bad on them after 3,000 miles. Check the car over to see if its been wrecked? I just don't know my self.

Ok, first don't laugh at the 60ft. with my wife driving she ran a 12.84 with a 2.4 60ft @ 108.9mph thats on street tires.

The factor with heat with L67 is rpm of the blower it self. I am running a 2.6" pulley on mine. With all of my mods I am only getting 11 psi of boost. This size pulley on a stock l67 would produce I am guessing excess of 20 psi. But that will pop pistons. I know of stock l67 with 3.25 that can...

There are quite afew grand prix running around spraying before there blowers. thats how i have mine setup.

That is very good numbers

Lot of your links are not worken. I just wanted to lookie lou at them.