Recent content by Dave King

I"m tuning a Chevy 427 motor for the first time and I have it dialed in good for driveability. However the car seems to lack the seat of the pants torque as it can't spin the tires at all. Motor seems sound, cranking compression is good, burns the plugs fine, no signs of detonation, a/f 13.0...

More info I forgot to mention I”ve been on the phone with Keyspan and downloaded all the correct drivers. In device manager it says the device is working fine. Keyspan also has a little program called Keyspan serial assistant and when I check it there it says everything is working properly...

Forgot to mention that I'm running Windows XP Service pack 2 - 32 bit. Laptop is a newer Gateway laptop has a Celeron 1.5G processor and 750 Meg of ram. I've had other tuning systems on this laptop and they've worked.

I"ve been tuning a guys car with Accel DFI. It's been all recently updated with firmware and I got the latest software for it. To make a long story short I initially used a USB key cable to setup the car initially. It got very unstable and kept losing communications. They told me to send in...

Hi All I emailed Jay and Scotter today about my concerns I had about Craig leaving and their not great custmer service that you get when you call them. In his response he responded with this Press release. To all FAST Customers and Friends: My name is Scooter Brothers, and I am...

Hi Dale, I'll give ya a call.

With the FAST system, when your in your Spark and VE tables, how do you call up an older datalog file to overlay? Any input is appreciated.

I'd like to get the Individual cylinder control update, whats involved? I already have sequential, just not ICC. Any input is appreciated. Thanks

You think FAST is bad, you should see how Electromotive is ran. At least FAST has engineers like Lance that know what they are doing.

I see your point now. Yes new Laptops are a problem. I bought a laptop for $200. Nothing fancy, just a NEC Versa with a P250, it has windows 95. I use it specifically for FAST. Nothing wrong with older technology. Now if race tracks start cracking down on laptops being in cars I could...

Dale would be a great person to do a video although again legal parts of this would make me nervous if I was the one actually doing it. Imagine the guys blowing their engines up and blaming it on the video. People sue at the drop of a dime these days. The concept of video taping is great...

Let me throw a different prospective on this. To the people that are running windows, whats wrong with running the DOS version? It simple, and it works. It works as good on a 2000 hp car as well as it does on a 300 hp GN. Are people running the Windows version because they want to use the...

Dale Cherry Berrel Auto 1836 York Rd Abington PA 19001 215-659-9907 Take PA turnpike 45 Minutes east past Reading Exit Exit 343 Willow Grove Exit Take PA Turnpike to Exit 343 Take 611 South for about 3 miles Turns into York Rd On right hand side.

I have a 97 Mustang Cobra with a 4.6 4 valve Mod Motor engine (I know I know) and I come to this board quite a bit because its by far the best resource for FAST tech info. I have a sequential FAST system with the FAST EDIS and a MSD box. My Cobra has been a been to a best of 8.61@161 mph at...

Craig So that I understand this correctly. Heres what I"m getting out of this. For a Small Block Ford (which I have) Black wire (Female connector side) goes to Black (injector side) and the fuel injector connector goes to cylinder #6 Brown wire (Female Connector side) goes to Blue...