Hey all. I fixed the high BLM issues I had, it was a combination of a few things, exhaust leaks, intake gaskets, blah blah. Got it all fixed, and I bought a TT chip from a board member for stock injectors. The car runs great, except cold idle is horrible, I have to keep it running till it warm up. ( about 157dF) and warm idle is ok. Idles open loop. The a/f is real fat, like TT says it should.
I started modding a stock bin for idle, i went off of a few things from a sheet I d/led from turbotweak. I haven't tried it yet though.
Are there anything you diy'ers did to smooth out your cold idle?
i know I can get chip vendors to burn me a chip that "works". But I would like to keep egr, and all the emissions stuff working. And I am not a fan of pulling out the prom, and sending it back and forth. When I can do it myself.
Any input guys thanks.
I started modding a stock bin for idle, i went off of a few things from a sheet I d/led from turbotweak. I haven't tried it yet though.
Are there anything you diy'ers did to smooth out your cold idle?
i know I can get chip vendors to burn me a chip that "works". But I would like to keep egr, and all the emissions stuff working. And I am not a fan of pulling out the prom, and sending it back and forth. When I can do it myself.
Any input guys thanks.