Transmission just quit???

[PhatGN]

woke up this morning cranked the car and let run for 2 min, backed out of driveway(steep uphill) and pulled in front of the house. still running i ran inside for about 2 min came back out put in drive and nothing, pulled down to 1st barely moved slipping like crazy. checked tv cable still attached and has resistance so its still hooked up, fluid is clean as new and full to the one quart above full mark thats suggested on here. Transmission has maybe 1500 miles on it no track time just street miles. This thing has never showed any signs of slippage or problems whatsoever, drove it to dinner last night (40 miles round trip) no problems!

What the Hell happened.

 

[Clark6]

who put it in? did you get the clearance on the torque conver to flywheel right? if your drive shaft isnt loose/shifter cable isnt broke or it isnt in neutral you need to check pressure out of your lines to make sure the front pump on the tranny is working and havent broke the tangs on the front pump some kind of a way. no reverse either eh?

 

[GNeric]

A quick check to make sure pump is ok. Check fluid level with engine off. Probably 2-3 quarts over full line. Start car and recheck. If fluid level drops back to 1 quart over full, pump is not broken. Broken input shaft. Broken forward drum spines, stripped input to overdrive planet spines. Few things it could be.

 

[David Husek]

Give me a call in Monday afternoon

 

[PhatGN]

Give me a call in Monday afternoon

sorry for the delay, it was one of those days again today but i will definatly give you a call tomorrow afternoon

thanks