turbobob924
Member
- Joined
- May 28, 2001
My wife is still sick and I dont have time to to put my hybrid back together after it has been in storage.
The medical bills are adding up....
Complete GN engine swap parts list.
Here is a start to see interest:
All prices before shipping
Precision TE44 turbo, good shape no end play. 350
Stock turbo in good shape 175
Casper's wire harness for GN engine swap, never used. 200
Stock wire harness including interior. 300 or 200 for just engine harness
Ported iron heads, 1.77 valves, cut for wire lock o-ring headgaskets, LT1 springs for flat tappet cam 500
Terry Houston DP elbow for tight fit engine swap or cut it to fit your project 150
Stock exhaust manifolds and cross over 100
Complete intake upper and lower with injector harness 150
Power logger 150
Motron 60lb injectors with less than 2 months use form Turbotweak 200
Inovative LC1 sensor and WB 175
TT SD2 chip for 60's and E85 150
RJC power plate 40
Coil pack, module and Magnacore wires, all worked great 125
Stock 109 short block with double roller timing chair and 206/206 flat tappet cam. Was running good before I stored it. I was going to put new bearings in it which I will throw in. 750
More to follow or PM me for other engine stuff if your are doing a hybrid or GN motor swap!
turbobob924
The medical bills are adding up....
Complete GN engine swap parts list.
Here is a start to see interest:
All prices before shipping
Precision TE44 turbo, good shape no end play. 350
Stock turbo in good shape 175
Casper's wire harness for GN engine swap, never used. 200
Stock wire harness including interior. 300 or 200 for just engine harness
Ported iron heads, 1.77 valves, cut for wire lock o-ring headgaskets, LT1 springs for flat tappet cam 500
Terry Houston DP elbow for tight fit engine swap or cut it to fit your project 150
Stock exhaust manifolds and cross over 100
Complete intake upper and lower with injector harness 150
Power logger 150
Motron 60lb injectors with less than 2 months use form Turbotweak 200
Inovative LC1 sensor and WB 175
TT SD2 chip for 60's and E85 150
RJC power plate 40
Coil pack, module and Magnacore wires, all worked great 125
Stock 109 short block with double roller timing chair and 206/206 flat tappet cam. Was running good before I stored it. I was going to put new bearings in it which I will throw in. 750
More to follow or PM me for other engine stuff if your are doing a hybrid or GN motor swap!
turbobob924