120lb Racetronix Delphi injectors,Mad Racing Billet Cam sensor, GN1 Comp Roller cam etc

[GBGN1]

1. I've got 2 sets of practically new 120lb Low Z Racetronix injectors. Just checked out and cleaned. *Less than 200 miles on one set ($325)and 350-400 miles on the other($290). Only reason for selling is going smaller on one car and larger on the other. Bought for testing. No issues. includes shipping

2. Mad Racing Billet cam sensor.NEW Clean sheet design this year. I had a run of sensors made for the Buicks earlier in the year. Sold most, Have a few left. Works great on Stock or aftermarket systems. %100 new USA billet housing, Fully rollerized MSD (imported Bearings) but quality,New MSD hall sensor , Caspers Buick Weather pack and TA gears . They are ready to go $650 plus ship

3. Brand New earlier in the year GN1 performance grind 210/215, nice cam . Bought as extra. still in bubble wrap. $600 plus ship

4. stock Harmonic Balancer $75 plus ship

5. Stock GN cam $50 plus ship

6. Turbo J bracket $60 plus ship

7. stock set of valve rockers $40 plus ship

8. stock cooling fan great shape 70k miles $95 plus ship
9. Set 86-87 stock headers, driver condition $150 plus ship
10. stock up pipe with two Alki control nozzle holes. Great shape $40 plus ship
11. Intercooler fans one 86 other 87 $45 each
bpryes@hotmail.com for fast responds can get pics of anything not pictured.

Located Houston TX

 

[GBGN1]

Some people asked for more pics

 

[GBGN1]

Free shipping on both sets of the Injectors

 

[MCH86GN]

You're not bailing on the Turbo Buick Scene are you?

 

[GBGN1]

You're not bailing on the Turbo Buick Scene are you?

No not at all, just trying to move some things around to help fund the turbo 350 project.

 

[MCH86GN]

No not at all, just trying to move some things around to help fund the turbo 350 project.

Ok, that is pretty cool. I have three complete longblocks for projects, LC9 5.3L aluminum, 4200 Vortec I6 and the same 3800 Series II block and the rods in it the ones I bought off you a while back. I vehicles to put them in though.

GLWS and if I could see my way clear I would like to get one of the Mad Racing Billet CAM Sensors.

 

[GBGN1]

Ok, that is pretty cool. I have three complete longblocks for projects, LC9 5.3L aluminum, 4200 Vortec I6 and the same 3800 Series II block and the rods in it the ones I bought off you a while back. I vehicles to put them in though.

GLWS and if I could see my way clear I would like to get one of the Mad Racing Billet CAM Sensors.

The Mad Racing sensors are great! Hard to compare to a stock sensor.

Cool, Yeah my 3800 car has been doing great,Pro flow Perf in Australia just released 8an fuel rails ,soon Billet valve covers and early next year a Billet Holley type Mid-rise intake and I score a set of ZZP aluminum heads That I might install as well in near future. The 350 will be a beast forsure.

 

[MCH86GN]

The Mad Racing sensors are great! Hard to compare to a stock sensor.

Cool, Yeah my 3800 car has been doing great,Pro flow Perf in Australia just released 8an fuel rails ,soon Billet valve covers and early next year a Billet Holley type Mid-rise intake and I score a set of ZZP aluminum heads That I might install as well in near future. The 350 will be a beast forsure.

For the Mad Racing Sensors, is it required to get an upgraded crank sensor, to have it work correctly? The Pro Flow Performance in Australia the parts they released are only for RWD? The billet Holley type Mid-rise intake would be sweet if it would fit on a FWD. Right now I have the smallest SC pulley 2.55" on the M90 SC and it is nice, but limited and I want to get rid of the SC and put some of the newer turbochargers on it. Precision of HPT 6466 would be sweet.