Rear end hold up?

[turbo_dreams_85]

i have a 85 hot air car right now but we are about to put a 86 motor in it i just wanted to know if the rear end will hold up to the add ons
heres a list
TE61c Turbo
Map Sensor
TPS Sensor
60 Pound Injectors
3 inch Poston Down Pipe
Poston Headers Ceramic Coated
Dutweiler Neck Intercooler
Poly Urathane Body Bushings Kit
Rear Seat Brace Kit
Chrome Molly Fly Wheel
Water & Oil Twin Pillar VDO Guages
High Performance Fuel Pump
Fuel Pump Wiring Upgrade
Remote Oiling System Upgrade
Underdrive Pulley set
Intercooler Shroud and Scoop
ECM
High Rev Springs
Chrome Molly Push Rods
High Rev Lifters
Gn 110t Cam
Accufab Adjustable Fuel Regulator
Fuel Rail Feed Line
Poston Ultra Chip
Turbo Tweak Chip
just let me know
thanks.
Turbo_dreams_85

 

[pacecarta]

if its in good shape
hotairs used the same 8.5 rears as the intercooled cars , same 3.42 gears

a good posi (like the eaton) and a set of aftermarket axles will go a long way...
further than your combo

 

[Quick6'n'-K.C.]

Depends on the hook, but alot of guys running 10s on stock axles...

I went ahead and added moser axles on my white limited because i didnt want to bust a 1/4 panel if one axle broke and came out.

BW

 

[turbofish38]

if its in good shape
hotairs used the same 8.5 rears as the intercooled cars , same 3.42 gears

a good posi (like the eaton) and a set of aftermarket axles will go a long way...
further than your combo

The weak link in the Hot Air rear is the posi carrier.Assuming you have posi. The HA used the dreaded Gov-Loc and the IC cars used the Eaton carrier.

 

[zhorner]

Can anyone give me some ballpark $$$ figures upgrading a hotair rear to an eaton setup?

 

[lrayzer]

$580 in parts, $375 labor, I pull the rears., some people still work under the car.

 

[zhorner]

thank you for the fast reply I sure appreciate it.

 

[lrayzer]

http://www.quickperformance.com/
Get everything you need here, including a cover.
I use Lucas synthetic lube, or royal purple

 

[dank GN]

I like your mod list . What are high rev lifters ? Are they roller lifters ? High performance fuel pump ? What's the size ? Just curious.ni just built my rear here is a parts list and some pics