Ported Irons w/Roller Springs and Lockwire Receiver Groove

[turbov6man]

Ported and Polished Iron Heads
Comp Cams Springs, Locks, Retainers for Roller Cam
Receiver grooves cut by Dan Strezo for Fel-1007 Headgaskets
1.77/1.5 Ferrea Valves
Rockers towers cut down, to ease fit of T&D roller rockers.

Porting done by Chuck Kuhn from New Albany, IN
Same person as in this article
http://gmhightechperformance.com/features/0307gmht_streetsleeperII/

Went 127+mph with these.

$650 + shipping. FIRM
or will deliver to BowlingGreen

Thanks,
Brad

 

[scottk]

heads

are these heads ready too bolt on?will stockrockers work on these heads

 

[GBGN1]

what do they flow?

 

[bison]

what do they flow?

Looks like they flow well considering the 127mph and probably 3500 lbs. This is a great deal for whoever takes it.

 

[turbov6man]

Yes, these are ready to bolt on. Stock rockers will work. Towers were ground down on the sides, so roller rockers will work easier. Other than that, rocker mounting is unchanged.

 

[ITSNOTAGN]

i am interested in these heads, i will let you know for shure tonight as i am selling my Banshee today(hopefully). are they still available? also if you have any pics could you pm them. thanks
Gary

 

[ITSNOTAGN]

hey if you would please call me back tomorrow, 8047315691, after 12 noon. i would like to purchase these heads, can send out a M/O on wed. the 10th. thanks
Gary

 

[turbov6man]

Thanks for all the response. Heads sold yesterday to ScottK.

Thanks.