Pics/Directions Racetronix Teflon Fuel Line Kit?

[Mike Licht]

Thought I would bring this thread back to life since I'm installing the teflon lines today along with a new 450lph pump. Everything is going fairly well, but I'm a little concerned with the connections at the fuel rail and the regulator. The stock lines have an o-ring and a tapered fit into the rail and regulator. The new lines aren't tapered and don't have an o-ring plus they seem to bottom out before they are fully on. Since they don't have an o-ring and aren't tapered, do they require teflon tape? I have to say I'm a little surprised the fit isn't better...

there is a seal washer that will work very well call if you have question
Mike

 

[Pronto]

Shows the 2 washers in the Racetronix webstore picture...

 

[huntsg]

Yes. I agree the two washers are there. It does no good if the threads bottom out before the washers are tight. I had to add extra washers and teflon tape.


Sent from my iPhone using Tapatalk Pro