When I would turn on my windshield wipers they would come on super slow rotate a couple times and then stop. Also there would be washer fluid but nothing would come out. After trying it again there is no power and the wipers do not move.
I then took the wiper motor off and tested the washer pump and it worked fine but cracked the housing and just bought another wiper motor. When putting in the newer motor after plugging it it I have the same result. No power on any speed and nothing moves. Took the unit back off and hot wired the washer pump, it worked, and hot wired the wiper motor, its works and rotates.
If plugged back in I get nothing. Checked my fuse its good. Tested the power wire that goes to the wiper motor (purple wire) and get 11.5v only when the stalk is on high and 0 when the stalk is at every other setting. I plug in the wiper motor when I am reading 11.5v on the purple wire and still get nothing.
Not sure where to go from here. If the motors work and there is power coming from the plug what gives?
I then took the wiper motor off and tested the washer pump and it worked fine but cracked the housing and just bought another wiper motor. When putting in the newer motor after plugging it it I have the same result. No power on any speed and nothing moves. Took the unit back off and hot wired the washer pump, it worked, and hot wired the wiper motor, its works and rotates.
If plugged back in I get nothing. Checked my fuse its good. Tested the power wire that goes to the wiper motor (purple wire) and get 11.5v only when the stalk is on high and 0 when the stalk is at every other setting. I plug in the wiper motor when I am reading 11.5v on the purple wire and still get nothing.
Not sure where to go from here. If the motors work and there is power coming from the plug what gives?