alwaysneedmore
New Member
- Joined
- Jun 5, 2001
Ok, so I just finished installing all the parts I bought for the 12" rotor, using GW arms. The Moog cross shaft that was installed on the arms said "wheel side".
I took the car into the alignment shop where they spent the better part of a day working on it trying to get it set up.
They told (and showed) me that they couldn't get the caster (or camber) to the numbers I gave them because they ran out of bolt on the one cross shaft, and there's a huge stack of shims.
Does this mean that those Moog shafts should be rotated 180 to get rid of the shims?
Please help.
Nathan
I took the car into the alignment shop where they spent the better part of a day working on it trying to get it set up.
They told (and showed) me that they couldn't get the caster (or camber) to the numbers I gave them because they ran out of bolt on the one cross shaft, and there's a huge stack of shims.
Does this mean that those Moog shafts should be rotated 180 to get rid of the shims?
Please help.
Nathan