CD? I don't remember whose it is, but it's THICK! And it came from a guy in west Chicago area. It comes with big steel pop rivits and he suggests panel adhesive too.
Main deal is level the car on jack stands, center the brace side to side, mark where it goes, drill 4 corner rivet holes, and remove the body paint from where the brace mounts. I was going to drill 4 corner holes, bolt it in, then apply the panel adhesive and drill and set the rivets, remove the 4 corner bolts, and then rivet those last holes. Leaving the car on the jacket ands to allow the adhesive to set up overnite.
Most of that, except leveling the car on jack stands is probably overkill, but I have been known to over think everything.
That's how I'm gonna do it anyway.
TIMINATOR
Sorry to the guy that sold me this wonderful part, but I bought it over a year ago. I'll post what brand it is after I look thru my stuff.
If you're gonna bother to do a brace, why not the thickest, and do a perfect job?