badgrandntl
Member
- Joined
- May 12, 2004
The car is a 1999 Trans Am black with a six speed manual transmission, t-tops, leather and 12 disc cd changer. There is around 89k on it. The car is originally from Alabama. I bought it 100% stock and have almost all the stock parts I took off. I have owned it for a year and only put on about 1500 miles on it. The mods were all done 1500 miles ago. It runs and drives great. The a/c blows ice cold. Only serious inquires. Considering trades for car, suv or truck, snowmobiles. Let me know what u have i could trade up or down. I've got almost all the stock parts less the exhaust and intake. I also have the dyno sheet. Im asking $13,000.
Here is a link to some pics of the car cant get the pictures to work here. Trans am Pics
Email for pics or call scott 262-510-4282
Engine
Torquer v2 cam
CNC ported and milled (59cc chambers) 5.3L heads (706 casting)
Fast 90/90 Intake and throttle body
TSP ported ls6 oil pump
Rollmaster double roller timing chain
Ls7 lifters
7.350" Hardened Pushrods
PRC Double Valve Springs
Racetronix 38# injectors
ARH 1 7/8 Stainless steel headers
SLP loud mouth II exhaust
Thunder Racing Coil relocation kit
Billet Fuel Rails
LS6 Valley Cover
FTP lid w k&n filter
FTP Ram air
Solid motor mounts
SD tuned pcm and dynoed by West bend dyno tunning 452 rwhp and 413 tq
Drivetrain
Pro 5.0 shifter with ws6 store short stick
Complete tick performance Monster stage 3 clutch kit
Monster stage 3 clutch
Heavy Duty pressure plate
12" ceramic 6 puck clutch disc
28LB SFI certified billet steel flywheel
Pilot bearing
ARP bolts
Tick adjustable master cylinder with remote bleeder
New slave cylinder
Suspension
Umi double adjustable lower control arms with Panhard bar with roto joints
Umi 3 point subframe connectors weld in
Umi tunnel mounted torque arm with drive shaft loop
BMR exteme strut tower brace
The paint is an 8 out of 10.
-spider cracking rear bumper
-roof and spot on hood clear coat is starting to bubble
Interior is 9 out of 10
- small crack in dash
The car looks great just wanted to disclose the paint imperfections
Here is a link to some pics of the car cant get the pictures to work here. Trans am Pics
Email for pics or call scott 262-510-4282
Engine
Torquer v2 cam
CNC ported and milled (59cc chambers) 5.3L heads (706 casting)
Fast 90/90 Intake and throttle body
TSP ported ls6 oil pump
Rollmaster double roller timing chain
Ls7 lifters
7.350" Hardened Pushrods
PRC Double Valve Springs
Racetronix 38# injectors
ARH 1 7/8 Stainless steel headers
SLP loud mouth II exhaust
Thunder Racing Coil relocation kit
Billet Fuel Rails
LS6 Valley Cover
FTP lid w k&n filter
FTP Ram air
Solid motor mounts
SD tuned pcm and dynoed by West bend dyno tunning 452 rwhp and 413 tq
Drivetrain
Pro 5.0 shifter with ws6 store short stick
Complete tick performance Monster stage 3 clutch kit
Monster stage 3 clutch
Heavy Duty pressure plate
12" ceramic 6 puck clutch disc
28LB SFI certified billet steel flywheel
Pilot bearing
ARP bolts
Tick adjustable master cylinder with remote bleeder
New slave cylinder
Suspension
Umi double adjustable lower control arms with Panhard bar with roto joints
Umi 3 point subframe connectors weld in
Umi tunnel mounted torque arm with drive shaft loop
BMR exteme strut tower brace
The paint is an 8 out of 10.
-spider cracking rear bumper
-roof and spot on hood clear coat is starting to bubble
Interior is 9 out of 10
- small crack in dash
The car looks great just wanted to disclose the paint imperfections
