Factory timing mark

[1984 t-type]

Just want to double check that these are the factory timing marks I don’t see any other dots or markings

 

[1984 t-type]

Also on the TA Performance chain is this the proper alignment for stock motor and cam ?

 

[TexasT]

I wouldn't trust any of it. Needs to be degreed in with attention to detail.

Camshaft degreeing 101

In the current buildup of Larry70GS's 470, we are going to be running 3 different camshafts, to test the effect of lobe designs and centerlines, as...

www.v8buick.com

 

[1984 t-type]

Ok after talking with TA Performance this seems to be the correct way. 0deg slot goes on the keyway. Just adding this for pics since we lost so much.

 

[SCOOBY DOO]

Appears you have it sitting at 2 degrees advanced...or am I wrong?

 

[1984 t-type]

Appears you have it sitting at 2 degrees advanced...or am I wrong?

According to TA the 0 slot goes on the crank key way, if I wanted 2 deg advanced the 2A slot would go on the key way.

 

[SCOOBY DOO]

According to TA the 0 slot goes on the crank key way, if I wanted 2 deg advanced the 2A slot would go on the key way.

Okay