OneQuikSix
Member
- Joined
- Jun 7, 2001
So I'm removing my Champion ported factory lower intake on Thursday to swap lifters with some new ones. After removing all ten intake bolts, this thing will not budge. I even tried prying up each of the corners with a screwdriver. It felt like all the bolts were still fastened. So, I got creative and placed a 1/2" drive ratchet in one of the intake runners to apply leverage to the intake.
It turns out once ported, those intake runners are pretty thin. This is the resulting hole in my intake runner.
Don't do what I did!
It turns out once ported, those intake runners are pretty thin. This is the resulting hole in my intake runner.
Don't do what I did!