Any tricks to installing these things? I have the car supported on the frame with jack stands and the rear diff hanging about 2 inches off the ground. Did not have alot of time to play with it but it does not go in like the stocker came out lol.
Years ago at BG, we used the aformentioned BFH, a crow bar and a ratchet strap. The ratchet strap was used to help pull the ends towards the middle. That made things a whole lot easier.
I didn't like the idea of the bar pushing on the HR control arms that much. I ground the mating surface until there was just a little resistance. I tightened mine while resting on the ground.