87 GN Parts Clean Out

[GNVYUS 1]

Caspers Thumbwheel for 60lbs, I have the settings but recent update was $80 alone, lock up converter and 2.0 Scanmaster, complete unit sells for $275 = $130 shipped

Stainless Bolt for Idler Pulley, I have a few left in bag of 10, $2.50 shipped

Evaporator = Make offer

Stainless Oil Pan Bolts = Make Offer

Heater Box Core = Make offer

Contact me at gnvyus1@hotmail.com

Paypal at the same address above.

 

[GNVYUS 1]

New Stock Fuel Rail Fitting -8 to 1.5mm, was $19 = $8 shipped

Stock IAC In Great Shape = Make offer

AC/Heater Box Shield = Make offer

AC Compressor Bracket = Make offer

Fuel Tank Hard Lines = Make offer

Contact me at gnvyus1@hotmail.com

Paypal at the same address above.

 

[turbonator]

Fuel Fitting

I Will Take The Fuel Fitting,thanks

 

[GNVYUS 1]

Fuel Fitting, 1 Idler Bolt and Oil Pan Bolts = SOLD

 

[russgill]

Interior Parts?

Do you have any interior parts? Looking for the plastic cover for driver side power seat rail, not the one which holds the power seat switch, but the one above it.

Thanks

 

[87WE4BOOSTED]

Thumb Wheel

What are the settings on the thumbwheel? Is one of them Anti-Theft?

 

[GNVYUS 1]

No interior parts sorry.

Thumbwheel has pump kill anti theft, I'll only tell the buyer what #.
I can PM the interested party with the settings if serious but it's an alky chip, has the anti theft, Valet and 3 settings have a 3rd gear WOT clutch lock up.

 

[GNVYUS 1]

AC/Heater Box Shield = SOLD

I have a set of SS Valve Cover Bolts new in bag = $8 shipped

 

[hbomb450]

scanmaster

is that what you are selling for 130 shipped?

 

[GNVYUS 1]

No, I was giving some details about the chip's setup. You can always send it back to Caspers for a tweak if you had a different Scanmaster etc.

 

[GNVYUS 1]

Caspers Thumbwheel Chip = SOLD

BTW, I have 4 Stainless Idler Pulley Bolts still available.

 

[cah]

$15.00 + shipping for heater shield

 

[GNVYUS 1]

Sorry, shield sold in post #8.

 

[GNVYUS 1]

Parts Left Are

Stainless Bolt for Idler Pulley, I have a 4 left, $2.50 shipped

Evaporator = Make offer

Heater Box Core = Make offer

Stock IAC In Great Shape = Make offer

AC Compressor Bracket = Make offer

Fuel Tank Hard Lines = Make offer

 

[GNVYUS 1]

NEW PARTS FOR SALE

Monroe Gas Shocks, used but in good shape, comes with air lines and fittings etc. $25 shipped

Grey Dual A Pillar Gauge Pod, used with scratch mark from dash on lower pod ( can't see when on pillar ) and punch outs for alkycontrol lights, $15 shipped

Fuel Pressure Gauge, mechanical, used gauge from Caspers kit but new line from alky kit, you can relocate it from the rail to the air filter, Caspers new is $42, I'll sell for $17 shipped

I can take pics if needed

 

[GNVYUS 1]

Still available

 

[DarrellChevelle]

Parts

Fuel tank hard lines still available. If so I'll take them. 15 + shipping fair ? If so pm me details for pmnt.

 

[GNVYUS 1]

New Part To Add

ARP Head Bolts For Stock Block & Heads, used around 30k miles, went to head studs = $15

 

[GNVYUS 1]

Stock Fuel Lines = SOLD