regal81455
Member
- Joined
- Oct 20, 2008
I just found this site and this guy talks about machining the spindle in order to fit the 4x4 hubs - does this sound like a good idea...
"Hubs:
The correct 2wd 98+ S10 Blazer hubs should be purchased off ebay as it's the
only place with reasonable prices. The BCA part# is 513200. 4wd hubs do not
interchange! The hub diameter where the hub slides into the knuckle is 3.62" on
the 4wd and the 2wd 98+ Blazer is 3.50" For my personal vehicles I am machining
my Belltech knuckles to 3.62" to use the lower priced 4wd hubs. BCA part#
513013 has no ABS and is the least expensive hub available. Approximately 1/3
the price. "
Anyone care to guess what the machining would cost??
"Hubs:
The correct 2wd 98+ S10 Blazer hubs should be purchased off ebay as it's the
only place with reasonable prices. The BCA part# is 513200. 4wd hubs do not
interchange! The hub diameter where the hub slides into the knuckle is 3.62" on
the 4wd and the 2wd 98+ Blazer is 3.50" For my personal vehicles I am machining
my Belltech knuckles to 3.62" to use the lower priced 4wd hubs. BCA part#
513013 has no ABS and is the least expensive hub available. Approximately 1/3
the price. "
Anyone care to guess what the machining would cost??