Search results

I moved up to 28" tires and they rub. Any suggestions on where to rent a fender roller. I'm in Tampa Bay if that helps. Thanks.

I noticed that the new filter is a tad shorter than the one on my car. Also, the top of the filter with the holes is different. Is this one OK?

The car feels shaky when driving, when the TC locks up in 4th, it gets really bad. So I changed plugs, plug wires...same problem. I have a coil pack (the black unit that the plug wires go to) from the previous owner marked good. Put that in tonight and still have the same problem. What else...

Anyone using the new (could be old, I just found it) Translator Pro system? If so, is it worth it? It says in can control boost, remove the MAF sensor, control timing, windows compatible and can be used as a data logger. I have the MAF translator now and was just wondering what I could buy...

I put on a Thunderfab intercooler and I do not have enough clearance between the intercooler and radiator for both the Black Magic Fan and the intercooler scoop. I'm hoping that a dual fan like Ramchargers is thinner. So, how thin is it? mo

Just got my Thunderfab intercooler. Taking the stock intercooler out I discovered an oil film all though the up-pipe. There is also oil in the throttle body and oil on the outside of all the hoses. There seems to be some oil residue on the entry and exit ducts on the intercooler but not as...

I went to the track for the first time last night:) Had a blast. Could not get my car to launch well with Nitto 275/50/15. Did not have much boost at the line and was spinning alot in first gear. I did a short burnout, samething. Did a longer burnout, samething. I was running 25# in each...

I thought the hoses on the turbo saver were leaking.....Wrong. It is leaking between the block and the piece that takes the oil to the cooler in the radiator. What part am I going to need to fix this? I'm hoping it is an O-ring. I assume all I do is remove the turbo saver, disconnect the...

I was coming home from St. Pete Friday night when a 'SHO GN1' passed me. Nice car!!! Who are you? mo

I'm getting my trans rebuilt at the moment for a street/maybe strip car. The shop asked if I wanted to get Kolene. Of course, I researched this board to find out they were not recommended (thanks Bruce). Is this still the current opinion? The thread I checked was about a year old. Thanks.

I just installed my new 50's in my car. At first, the engine would not turn over. I pulled the plugs on the passenger side of the car and a bucket of gas blew out from #6 and some from the other two when the engine turned. Put the plugs back in and it started, however, running real rich...

Followed the instructions on the other web page and I have one question. Do you bleed the air out of the line or let the air get pumped through the injectors? Just remembered, does the air bleed out through the return line? Also, my car has a Kenne Bell hood mounted fuel pressure guage. Do...

Cranked up the car today, everything is fine for about 2 minutes, then it starts to idle bad. Scan Master is blank. So, I put in the tomco key and get an error code 51 meaning faulty PROM or ECM. Any suggestions on troubleshooting this problem? Help would be appreciated.:confused:

I just bought my 87 GN in December and am starting to have a unique problem with the trans. The trans has been reworked by a very reputable vendor that posts to this website, so it is not stock. Here is the problem. This started last weekend when the alternator went out, I do not know if...