Search results

I stumbled on an 84 T type in the yard today that has a pair of rough Lear Siegler seats in it. Some douchbag cut out the turbo Buick emblems but the rest appears to be intact. The drivers seat does not have a power track and they are trimmed out with leather centers and tan fabric on the...

My G body Cutlass has the 98-02' LS1 rear brake set up but the factory 15" rims require a .25" spacer to clear them. I've read that if I go with spacers, they should be billet and "hubcentric" meaning the spacer maintains the relationship between the hub and wheel which helps to secure the rim...

I'm looking for a pair of rear LS style disk backing plate brakets with the dust shield and e brake set up I can buy them new from the dealer but would like to save some $$ on used parts. I can find them at my local LKQ but they are rusty here in Michigan. These parts can be found on any...

Anyone willing to help me out with a pair of rear LS style disk backing plate brakets with the dust shield and e brake set up? I can buy them new from the dealer but would like to save some $$ on used parts. I can find them at my local LKQ but they are rusty here in Michigan. These parts can be...

At some point, I've read on line that the G body.com tubular upper control arms that sell for around $150 will "bend like a pretzel"....Anyone here have them that can comment on quality issues? I like the simple, light weight design.

I would like to replace my front inner wheel wells with new. After checking with my local GM parts guy it looks like they are aren't available anymore. Does anyone here have a good source for aftermarket or NOS? Car is an 1984 GN. Thanks

I'm going through the front suspension on my G body this winter and looking for some input on lower A arm bushings. Can I put install ILE bushings or is this a waste of time? Are there better options without spending a fortune? Thanks

Could someone please help verify if all 98' or newer 2WD blazer spindle knuckles are compatible with the (2) piston caliper and large rotor or if there are specific spindles I need to look for? I have a lead on some spindles but want to make sure they'll work for the front brake upgrade...

I finally discovered that the small but irritating leak I have on my 200 R4 is coming from the shaft seal. Is it a big deal to replace the seal with the trans in the car? Should I use the stock replacement part or is there something better out there? Thanks

I'm looking for a nice set of rear lower control arms. I prefer Currectracs but would consider billet aluminum style with provisions for factory sway bar mounting. Thanks

My 200 R4 has firm shifts and works flawlessly other than it seems to up shift from 1-2 too soon. In addition, if it is in 2nd gear and I go WOT I can not get it to downshift back into 1st gear. The TV cable is adjusted correctly and I am using all the stock brackets and linkage. Any ideas...

Just like the title states I have never been able to get rid of leaks on my OZ code 200R4. Anyone with a similar experience or lessons learned?? I thought it was the crappy OEM pan that was warped so I bought a cast aluminum hughes pan. It came with a fiber gasket that I decided to try with a...

OK, so I know your thinking, go to the web site, find the 1-800 number and give them a call. Well, I've done that 4 times last week but no one picks up. No returned messages and no returned e mails. Do these guys want our business? Any suggestions on how to get sales and technical support...

I'm getting ready to install an OZ code (Specific to Hurst Olds) 200 R4 in my 442 G body cutlass. I've done this a few times before and as a starting point have always adjusted the TV cable for full extension at full throttle. I'm curious to know if doing this could cause damage to the...

I'm cleaning out the garage and selling this steering wheel I pulled from an 87' T type several years ago. It's not NOS but as you can see is in nice driver condition. Like many other TR steering wheels, the horn cap ring is cracked on the sides at the SHSC holes (thank GM for not using UV...

Any opinions on what this is worth? It's a grey 86'-87' T type steering wheel that I'd like to sell at an upcoming swap meet. It's used and is in generally good condition. The horn cap is brittle and has the typical crack where the SHCS holes are. (thanks GM for not using UV stable resin) I...

Hey guys, I've got an 87' T type steering wheel sitting around that I'm thinking of getting rid of. How much are these worth? The center cap has the typical brittleness/broken screw mount but its a good driver quality wheel. Thanks.

Anyone have a nice used trans pan for sale? I'm only interested in the cast aluminum style (hughes, etc). Thanks