Search results

Guys, My car overheated temperature reached 227 per scanmaster. I pulled over raised hood and noticed a large coolant puddle on the back of the intake. I had the car towed home checked heater core hoses and none are cracked. Oil looks normal any ideas?:confused:

Guys, I have a GNX dash and the VDO speedometer fulctuates at cruising speeds. I removed the lower cable and cleaned/lubed it but it still fluctuates. The dash was purchased new from Tom at gnxdash.com but I have not been able to contact him. I know its either the lower cable or the VSS that...

Guys, I have an 87 gn and I had the AC on while waiting to pick-up my daughter from school. All of a sudden I heard a noise come from under the hood(banging noise & it also sounded like radiator was overflowing) so I quickly turned off the AC and the car. I raised the hood and saw smoke and...

Does anyone know where the hose that attaches to the pts overflow bottle connects to the pts transmission? The overflow bottle was installed with transmission and is located under driver side frame rail. Hose is torn from transmission please advise on connection.

Guys, Volt light came on last night I checked scanmaster voltage at idle was 11.6 - 12.0. Took battery to Autozone had it charged and tested; batery tested good. Installed battery checked voltage on scanmaster 12.0-12.2, started car voltage at idle 11.6-12.0. Volt light comes on and stays...

Guys, I have a PTS Tranny with 911 convertor, there is a clanking noise when I put the car in gear and also when the car downshifts when coming to a stop. I have checked for loose bolts but have not found anything.

Guys, In process of setting tps, scanmaster reads .44 and maftpro is reading .24-.35 which one is correct? Car seems to run fine not seeing any codes just seems odd that the two tools don't read the same. Any ideas?

Guys, I am about to paint interior trim (headliner trim, A pillars, and Bpillars) any advice or thinkgs to look out for before starting? Are the Bpillars difficult to remove? Thanks

Turbo Bob, I ordered my maftpro back in October of this year, My documentation has 4.00 on top of he page and Maftpro says 4.00 when it comes on. I will wait for ver. 4.4. I installed my maftpro and extender chip last night to my daily driven GN. i set the parameters per instructions the...

:) Guys, I just installed my BB turbo that I received from Cotton's Performance. The moment I took the turbo out of the box I was very impressed with the overall appearance and the fact that it made my TE 62 look like a stock turbo. The spool on this turbo is unbelieveable, it spools...

Hello, I just received my t-link please review data to let me know if you guys see anything out of the norm Thanks I am running an adj. reg. set to 45# vaccum line off, thrasher chip. The instructions on how to set IAC says car should be in closed loop but at idle my car run in open...

Hello, I noticed that the 2 hoses that come from the egr solenoid are not attached to the egr valve on my car. Can someone please tell me or provide a picture as for where these 2 hoses attach to the egr valve?

Hello, I bought a front O.E. style sway bar from P-S-T. I went to Big 10 to have it installed but the kit did not come with the bolts that connect the U shaped clamp which support the sway bar to the frame.(previous owner removed swaybar and all hardware) What is the correct size bolt to use...

Guys I have an 87 gn that the previous owner installed 32lb bosch ford injectors (0280150756) which are rated at 32lbs. My question is what is the best chip to use with theses injectors? Thrasers chips are for stock inj. and blue tops and I was told that jays are for stock and bluetops. Can...

Can someone please run a carfax on VIN (1G4GK4778GP429693) A local dealer is asking 18,800 for an 86 GN, with 47,000 actual miles, t-tops, interior and paint are in great shape, it needs bumper fillers and there is a crack in the driver side header. The aftermarket items are Kenne Bell...

Can someone tell me who sells the upper heater core/blower box for an 87 gn. I busted mine trying to chase down a water leak. Thanks Xman