Search results

Yes....alot of diesel systems are using single screens with about 4 sensors being displayed

Will fast or anyone ever develop software that can be used on a PDA for street use. Like a simple screen that shows boost-A/F-Timing etc. Or even the complete software that will run on a handheld?

Thanks for the response we are sending the box back to get all updates and check that driver. We have the harness from accel that goes from the dist to the harness there are two wires that come out of it one is hooked to a ground the other goes to the neg side of the coil.

gen vii with 2002 software......this system use to be on a mod motor....now it is on a 351 ford with 72lb inj i have no spark at all i have replaced the coil, and module...i have 12v while cranking at the coil and computer....the dashboard on the dfi shows over 100rpm while trying to crank. the...

well thanks for the offer we are in Birmingham we have a tuner down here just wanted something so we can start it up in the garage and get it broke in

Looking for a program to put into my gen vii It is a 351 mustand nothing fancy with dart iron heads T-76 turbo 3 bar map sensor and 72lb inj. Just looking for something that will startup and break the motor in on

Thanks for the reply the 408 should be here in the next two weeks Then we are going to order the fast unit Hopefully the New fast will be out by then.

yes that is my problem is clearance This is a dist that somebody recommended i am using a bank to bank setup I dont know if all of the msd pro billets and the right pickup for the FAST system

It is going into a 87 corvette Dart block www.twinturbovette.net somebody was showing me this dist http://store.summitracing.com/default.asp?target=partdetail.asp&Ntt=msd%2D2345+&view=1&N=0&part=MSD%2D2345&Ntk=KeywordSearch

I am going to run a FAST system on a corvette, I am wanting to run a MSD pro billet dist. Looking for the part # of a msd dist that i can use for the crank trigger pickup. Would like to stay away from buying a crank trigger and billet dist. This is a 408 with a race harness. Also does...

I am interested in the FAST box call me at 205-296-5108

What dyno are you going to?

When is the new fast box coming out.

chuck it makes 15 psi at 6k it is only making about 5 psi at 3500 which the a/f goes to 12.5 on the a/f on the fast system it has 72lb injectors it also has a weldon pump on it fuel pressure is fine we think the opti spark is going out again but this will be the third one was...

Thanks for the help lonnie/craig

This is a different car then my first post this car is a 383 with a t-trim vortech lt1 car runs about 14-15 psi the customer said it made around 500hp then brought it home one week later opti spark went out so they install a new opti spark once getting it to run again they bring it to...

working on a lt1 car with opti spark first what should the crank ref angle be set at is there a way to check the timing with a light

yah we got it thanks for the help the strip was going the wrong way on the diode once we changed those all works great thanks again for the help

i think we just have the diode in the wrong spots

ok i am trying to understand i am not a wiring guru : the 2 step need a ground to work i thought when u hooked a wire to 87a it would be the same as 30 until u powered the coil and then it goes dead then once the coil is activated 30 and 87 were the same