Search results

Need information and feed back soon as possible with the CP Pistons that i am using for my stage 2 motor.My problem and concern is the clearance between the bottom of the piston and top of the Carrillo 6.5 on center rod. I took pictures so you guys can see if i will be running into problems...

Was wondering if the Federal Mogul rod bearing # 6-7120CH -10 have a upper and lower bearing because there is no marking on the rod bearing that tells me which are the upper and lower bearings?Also want to make sure that the piston valve relief are toward the top on the block and the Carrillo...

What method are the buick guys using for setting the new piston ring on the stage motors.Like installing them dry in the bores,oil the skirt with 10-30w but not the pistons,or oil the skirt and spry WD 40 like the ring manufacture says thanks.

What piston gaps are you guys running with forged CP piston and total seal rings? Manufacture specs say with a 4.0 bore x .0055 blown gas* =0.22 top ring and 4.0 x .0035 second ring = .014 is this a good ring gap.Also do i need to get Quickseat or use WD-40 to seat the piston rings thanks.

Need help on the main cap back seal big block chevy 2 peice seal and also part number or the name of the guide strip that go on the rear main cap on the two sides.I am talking about the two machined grooves on the cap? Also need cam pictures fully assembled with all parts needed so distributor...

Anyone have pictures of Danny Bee or Duttweiler cam trust plate that holds the cam in place in the front cover. Need to drill and tape for the retainer plate.Looks like there is on really one way to drill and tape the hole locations thanks.

Hi GN owner i am going to be in Tampa for the Superbowl half time show and would like to see if anyone near Tampa has GN with stage 2 on center block that i can look at so i can get ideas on my stage 2 on center block build thanks. Here is my cell phone # if someone knows anyone 805 760 0865.:D

I am hoping that someone can help me out with picking up parts from Deltona Florida and shipping them to Camarillo California.I will be willing to pay or if someone is interested be willing to trade stock or stage 2 parts in return thanks.Need to know ASAP.My cell # 805 760-0865.

Need help on balancing stage 2 motor all machine work in done except for balancing the rotating mass like crank,rods pistons,pins,flywheel and balancer.The machine shop had trouble balancing the crankshaft because there was alot of material meaning metal removed that i had to weld back on the...

BMS off center converted intake DFI with fuel rails,SX fuel regulator,Precision 90mm elbow and Holley billet throttle body. Everything is new except for the BMS intake asking $1000 Carrillo on center 6.5 rods with Carr bolts asking $650 Full 360' BMS harmonic balancer for forged crankshaft...

Need help picking out the right piston rings material for my stage 2 on center motor. Waiting on my CP Pistons to come in so i can start putting my motor together. What are you stage 2 buick guys running for piston rings with about 30 Lbs. of boost or more?What type of piston ring material are...

Anyone know Mike Zimmerman from Arizona who works on buick and build engines?How is his work and do you have # so i can contact him for my stage 2 project build?:)

Anyone knows Mike Zimmerman from Arizona who works on stage2 buick motors and what to you think about his work?

Needs help with ordering pistons for my stage 2 project.Block #153 4.030 bore,duttweiler stage 2 BMS heads aluminum 46cc 2.125 intake and 1.625 exhaust,Carrillo 6.5 on center rods bushed .927 with Carr bolts,LA billet 3.590 crank,comp cams roller lifter,comp cams 224 224 .577 gross lift,Jesel...

Are the stock syclone crankshaft even fire or odd fire cranks and which ones bettter for high HP motors?Anyone using Brodix aluminum heads and with what intake?Need help with casting numbers and what they are 23 or 18 degree heads?How much can you bore a bowtie v6 block and rod length that can...

What cam bearings should i use for my stage 2 build i currently have dura-dond bearings #B-12B are these the right bearings for the stage blocks?

Now that i have all the parts together for my stage 2 build i need help like cam bearing placement for dry sump oil system with com cams roller lifters and Jesel Rockers.Do i follow the BMS book on the torque specs for fasteners like main studs,head studs,rods and the rest of the bolts.

Just got my buick stage2 heads back from Kenny D and was mocking my heads,intake,rockers and buick valve covers.The heads are find but i found out that the Buick stage 2 intake that i converted to DFI is not bolting up right and i bolted up another stage 2 intake that worked out better and...

Stage 2 block for sale #4x151981 new never been machined,BMS crankshaft 3.625 standard size rods and main,BMS balancer,Carrillo on center 6.5 rods,used BMS stage 2 heads with valves,springs and retainers,new BMS stage 2 aluminum heads bare,BMS front timing cover dry sump,Comp Cams roller...

New virgen off center block 4.1 buick $3000 or best offer.