Recent content by Tony sy2356

Any problems shipping to Canada? Tony

How about a balancer? Tony

I need one asap, let me know what you have and I can paypal right away. Turbotonyshaw.ca Tony

Okay so this is weird. Got to look at this GN that a guy brought to me because he thought that a head gasket had let go. That story is here I took a good look at it today, his complaint was a coolant leak, a weird noise, and smoke from the engine. He was out driving it the other day when...

Hey all, I spent some time searching for an answer to my questions, but I didn't find anything very clear one way or another. Story time first. A few years ago I built a GN up for a friend of mine, he recived it as a basket case in many many boxes. The long and the short of it was we...

Check your turn signal switch. Have someone wiggle the arm while you watch the lights. Very common problem Tony

When is the last time the fuel filter was changed? Typically a new filter will quiet the pump down a fair bit. Tony

The procedure to reset the lamp is in the owners manual. BTW did you actually change the oil? It came on to remind you to do so. :D Tony

For all you syty.net junkies, here's the link that works right now. http://sytynet2.phpwebhosting.com/phpBB2/index.php Enjoy Tony

Here's an even rarer/spendyer car. :eek: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2448476806&category=6230 Tony

Any idea what the cam specs are? TBI's and 7747 ecms are very tricky to tune with any sort of cam thats even a little "big" Tony

In defense of your buddy the service manuals have been wrong on that procedure for years. They still haven't fixed it. Ask me how I know. :rolleyes: The funny thing is when the cams are 180 out they will still run just fine, till ya get into it. Imagine a 3.4 liter 3 cylinder. Thats what...

Depends on the ambient temp. Low temp = low pressure= quick cycling. ;) Although the car likley is a bit low on charge. Disconnect the pressure cycling switch on the accumulator for the winter if you'd like to get rid of the compressor cycle. Tony

It is normal for the compressor to cycle on when in the defrost position. Tony

My T type has a similar rattle. It's the linkage from the tranny tp the steering column. The bushings wear and the rod that runs from the column to the sector makes just that noise. Next time it does it grab the part of the column that twists when you shift gears and give it a bit of a...