Recent content by ricturbo

have stock 86 gn stock chip ext running 93 oct . wot I got a reading of 4.5 retard heard no knock. Is that a bad number or normal.

what would be perfect numbers for scan tool ?on stock 86 gn

will 12lbs be safe 92 oct factory chip ext?

is it ok for it to red light on stock 86 buick 12lb boost?

I have 86 tb and the scan tool iac is 18 hot . Is that ok? also what is af on scan tool and what should it read?ALSO i HAVE FACTORY MAF SENSOR . AND FACTORY INJECTORS. thx what should I set my fuel psi at ?

It started doing it today and I unpluged the 4 wires and it cleared up .plus now the tv cable makes it shift harder the guy tha redone trans said it wont hurt to leave unpluged.the tv cable seemed to have no change before unpluging wire . it did jurk like manal shifted to soon. has anyone left...

reading some of other threads .would it be posible that the tcc solenoid could be bad? if so when it does it again sould I unplug to see if it stops.it was just rebuilt but I dont know what was replaced.

what model is it br or what? I hooked lines up to rad maybe that will keep it cooler while setting.

just drove car for 25 miles done ok at first then as it got hot it seemed to shift into high gear almost like it was in overdrive move tv toward fire wall 2 notches didnt help. may have changed into high gear alittle quicker or it could be because it was hotter I have tran lines unhooked from...

it was built stock the guy said make it shift in to 2 at 15 mph . drove it today and it shifted ok but on way home it was alittle jerky when around 38 to 42 driven around curves like it was in od . I dont want the trans to tear up to much presure or to little . had a mild shift kit put in it...

just had trans redone trying to adjust tv cable. it really doesnt seem to change presure when I move tv cable. it changes into 2 at 13 mph and 3 22mph not had in 4th yet anyone have ant ideals why it doesnt change when I move tv ? I press pedal to floor each time

my 200r4 is slipping again .does anyone know if 350 trans will mount straight to my engine ? 86 gn thx...

I have 86 turbo the third gear seam soft when shifting into 3 . Ive had it parked for a while when I moved it I heard the mild swishing noise . when I hammer down on car the boost and rpms shoot up but car not hardly moven . Now should I have trans rebuilt or put in new tougue converter ? anyone...

I saw the pic of tv cable looks just like the one I bought from a member on this site. I wonder if someone has put a dif trans in this car?

put a new tps on today no change, plus tryed to install the tv cable it was to big for hole on tranny what a waist of time ,and fluild. bought from someone on this sight. Have not yet tryed the fuel filter . Im starting to think that maybe the trans is going bad all gears shift good except 3rd...